Series 1 connectors offer ultra high-density contact arrangements in a miniature circular shell. LJT features include - total environment sealing, wide operating temperature range (-65°C to 200°C), quick mating three-point bayonet coupling, 100% scoop-proof shell design, EMI-RFI shielding, and available in a rugged 500-hour salt spray plating. Intermateable with ITT Cannon, Deutsch, Souriau, Matrix and all MIL-DTL-38999 Series I connectors. Formerly MIL-C-38999. Mil spec part number prefixes include: MS27466, MS27467, MS27468, MS27496, MS27505, MS27656.

MIL-DTL-38999 Series 2 (JT) connectors offer high-density contact arrangements in a low profile miniature circular shell. JT features include - very small area for mating, total environment sealing, wide operating temperature range (-65°C to 200°C), extremely light weight, quick mating three-point bayonet coupling, wide range of receptacle styles, and optional 500-hour salt spray plating. Originally designed for the especially demanding requirements of today's high performance military and commercial aircraft, these connectors are finding their way into applications needing extremely reliable interconnections. Intermateable with Deutsch, ITT Cannon, Souriau, and all MIL-DTL-38999 Series II connectors. Formerly MIL-C-38999. Mil spec part number prefixes include: MS27472, MS27473, MS27474, MS27484, MS27497, MS27499, MS27500, MS27508, MS27513.

MIL-DTL-38999 Series 3 (TV-CTV) Tri-Start connectors offer high-density contact arrangements in a miniature circular shell. TVs features include - total environmental sealing, wide operating temperature range (-65° to 200°), quick mating, triple lead threaded, self-locking coupling, 100% scoop proof shield design, EMI-RFI shielding. A 500-hour salt spray resistant plating is optional. Intermateable with Deutsch, ITT Cannon, Souriau, and all MIL-DTL-38999 Series III connectors. Formerly MIL-C-38999. Mil spec part number prefixes begin D38999/

PEI-Genesis large inventory of Quadrax contacts is especially important when used with the popular MIL-DTL-38999 connector line. PEI-Genesis has the largest Quadrax inventory in the world - and we build the Quadrax Groundplane Connectors from stock so we can ship you a complete system. In Comparison, most distributors require long lead times and impose mandatory minimum purchase quantities for Quadrax contacts and connectors.

The HD38999 family of connectors was designed to work with existing mil-specified 38999 shells. To the end users familiar with standard 38999 connectors, this family of high density connectors will look, feel, and perform just like the mil-qualified connectors. Utilizing an existing mil-qualified 39029 size 23 contact and mil-qualified shells, the new system will be, in many cases, a drop-in connector. Even though the HD38999 has 30% more contacts, it still performs to minimum electrical requirements of standard 38999 connectors.

The Amphe-Lite Connector Series is designed for communications equipment manufacturers with signal, power, RF or fiber optic interconnect requirements in harsh environments such as communication towers, outdoor and roof-top applications. This commercial 38999, Series III type composite connector is ideal for communications equipment, manufacturing process control and medical equipment. The Amphe-Lite offers the highest performance capabilities for severe environment applications and yet is cost effective enough for general duty and non-environmental applications. The Amphe-Lite is UL Recognized, file E115497.

SJT connectors, commonly know as 38999 Series 1 ½ , offer the  high-density contact arrangements of MIL-DTL-38999  in a miniature circular shell. They are qualified to JN1003 and meet requirements of  VG96912. SJT features environmental sealing, wide operating temperature range (-65°C to 200°C), quick mating three-point bayonet coupling, scoop proof shell design with EMI-RFI shielding available. A 500-hour salt spray resistant plating is optional.

A medium-sized cylindrical connector featuring quick bayonet coupling, crimp, solder, or printed circuit board termination. It offers seven mounting styles and ten shell sizes. Interchangable with all MIL-DTL-26482 connectors. Mil Spec prefixes include: MS3110, MS3112, MS3114, MS3116, MS3119, MS3120, MS3122, MS3124, MS3126. Amphenol proprietary prefix PT.

Amphenol 62GB Series connectors are built to British Standard Specification BS 9522 F00 17 and pattern 105 which are similar to US military specification MIL-DTL-26482, but with the added advantage of keyway orientation. They standard shells are aluminum and may be specially ordered in brass or stainless steel. PEI-Genesis is the largest assembler in the world of 62GB connectors. Take advantage of our inventory and speed of assembly.

Amphenol broadens their Miniature Cylindrical Family of Connectors with the addition of the Matrix® Product line of MIL-C-26482, Series 2 connectors. This series provides a bayonet coupling connector with crimp rear insertable, rear releasable contacts. Mil spec part numbers include: MS3470, MS3471, MS3472, MS3474, MS3476,MS3475. Amphenol proprietary prefix MB.

A medium-heavy weight connector offering five mounting styles, nineteen shell sizes, and solder or crimp termination.

This series provides an alternative to the older MIL-DTL-5015 solder type. Uses rear release crimp contacts with retention clip. It bridges the gap between an older 5015 connector standard and the environmental and higher performance needs of advanced technologies. Formerly MIL-C-5015. Mil Spec prefixes include MS3450, MS3451, MS3452, MS3454, MS3456, MS3459.

A low cost, general duty, non-environmental connector featuring solder termination. UL approved and CSA certified. This is the original "A" version of the MIL-C-5015 connector that has a hard (blue) insulator. The MS-A version is Inactive for new military designs, however 97 series connectors can still be purchased under the inactive military part numbers, but use caution. MIL-DTL-5015 now uses a resilient (gray) insulator. The obsolete MS-A connector can be purchased with either the original hard (blue) insulator shown here, or the newer sealed construction, using a soft (gray) insulator and an "-RES" suffix on the part number - you must specifiy which insulator you prefer. Mil-Spec prefixes for these parts were MS3100A, MS3102A, MS3106A, and MS3108A. Industrial 97 Series prefixes include 97-3100A, 97-3102A, 97-3106A, and 97-3108A.

Heavy-duty, rugged, waterproof connectors with quick reverse bayonet couplings and a wide variety of backshell options. This connector is the world standard for rail and mass transit applications and is widely used in military ground systems and vehicles. The GT is the ideal connector to use anywhere you need a reasonably priced connector that absolutely must work reliably in a harsh environment. Hundreds of contact configurations with contacts for wire ranges 26AWG to 0 AWG carrying up to 150 amps (or 225 Amps with Radsok contacts).

Latest development in the MIL-DTL-5015 family. These connectors feature black zinc alloy plating and are available in five shell styles and nine shell sizes with threaded and reverse bayonet couplings. Rated to 500 mating cycles minimum. AC/AC-B is a lower cost version of the Amphenol GT series.

Conform to the VG95234 German military standard, the connectors use the same dimensions and contact arrangements as specified in MIL-DTL-5015, but they are provided with a reverse bayonet coupling. This ensures quick and effortless locking/unlocking but also avoids unintentional unlatching in conditions of severe vibration.

High performance at low cost for applications requiring environmentally sealed, yet inexpensive connectors. An oil-resistant, one-piece waterproof design incorporates crimp poke-home contacts in six insert configurations.

These miniature bayonet-lock molded thermoplastic connectors features IP67 environmental protection suited for industrial applications. These RoHS compliant connectors offer a heavy duty ribbed coupling nut for plugs and a 4-hole flanged receptacle for mounting. All connectors are supplied with a neoprene rubber insert and gold plated solder termination contacts, up to 10 circuits.

Amphenol Industrial Operations, the worldwide leader in explosion-proof and hazardous environment interconnects, introduces a new, miniature, explosion-proof threaded connector specifically designed to allow a signal to pass through Zone rated areas using coax, fiber optic cables, or standard copper.  The new Amphe-EX™ is complimentary to Amphenol’s industry-proven Star-Line EX™.  In addition, the rugged Amphe-EX™ connectors are ATEX and IECex approved for Zone 1 rated applications (IECex 60079). PEI-Genesis is the exclusive worldwide Amphe-EX assembling distributor. PEI is certified to build the entire Amphenol explosion-proof offering.

The Amphe-PPM is a rapid mate, push/pull connector. Amphe-PPM provides positive mating in a limited space with extreme ease of use. Save space and cut your installation costs. Amphe-PPM, the high performance signal and power interconnection solution, is ideally suited to many Commercial & Industrial Applications including, but not limited to: Medical, Instrumentation, Test & Measurement, & Communication Equipment.

These low cost, circular cable connectors with plastic backshells are used in a wide variety of industries and equipment.
High quality metal threaded coupling and internal cable shield terminations provide EMI protection when fully mated. 2 to 8, 12, and 14 contacts are available. Solder or crimp terminations are available with silver or gold contact plating. Sealed to IP40.

Plastic bayonet locking and plastic backshells are featured with these circular cable connectors. Straight and right-angled cable entry is available with 3 to 8, 12, and 14 contacts. Solder or crimp terminations. The wire strain relief and shell are metal construction for shielding. A plastic strain relief is also available. Sealed to IP40.

Precision metal construction distinguishes this harsh environmental connector series. Threaded metal screw couplings provide ingress protection under Class IP67.Wire strain relief is metal shell construction for shielding. 3 to 8, 12, and 14 contacts are available with solder or crimp terminations.

High performance circular cable connectors designed to meet harsh environmental conditions. Straight and right-angled, high-grade plastic cable housings are preferred for power and signal applications. Vibration-safe connections are provided by a solid bayonet coupling. For safety, pre-earth first-mate last-break contacts are standard. Screw and crimp terminations are available. Sealed to IP65.

These connectors are designed and produced in conformity with the low voltage directive (73/23/EWG) respectively Gerätesicherheitsgesetz (German law) and in accordance with the standards DIN EN 61984 (VDE0627); IEC 60664-1 (VDE 0110-1) and IEC 60529.

From low cost, straight solder and press-fit terminations to high reliability connectors qualified to MIL-DTL-24308, many styles and options are available for light duty industrial applications.

Having evolved from Amphenol-Tuchel's C16-1 series, the new Eco-mate connectors are completely intermateable and interchangeable with the old C16-1 products. Eco-mate connectors are made from tough polyamide material and offer environmental protection of IP65 or IP67, depending on model.They also feature a vibration-proof coarse-threaded cable gland and are ergonomically shaped to facilitate quick mating/unmating even under extreme environmental conditions.. 

A full range of high quality, cost competitive connectors that meet or exceed all EMI/EMP requirements is available. Proprietary, stress-isolated, solderless technology is used to provide tubular, planar, or chip capacitor-designed products.

Terminal Blocks filtered to protect your sensitive electronics against noise and transients.

This UL recognized product comes in various sizes and termination types with stress isolated filtering.

High quality and dependability are the earned reputations of the Amphenol/Pyle Series of connectors designed to meet the specification requirements of MIL-C-26500. Serving such diverse fields as avionics, missile systems, aircraft general-purpose applications, aircraft engines and firewalls, the Amphenol/Pyle MIL-C-26500 connector family meets the myriad of problems with innovative connector solutions. Amphenol/Pyle MIL-C-26500 Connectors are medium sized connectors with a rugged design, lightweight construction and continuously dependable performance.

The Amphenol 348 Series connector provides reliability and high contact density. 348 Series is a commercial equivalent to MIL-C-81511, not qualified to MIL-C-81511, these connectors can accommodate a minimum of three circuits to a maximum of one hundred and fifty five circuits. Amphenol 348 Series connectors are available in two basic constructions: Long (Series I) and Standard (Series II). The Series I features 100% scoop-proof construction (potential contact damage minimized by recessed pins). Series II, Standard connectors are scoop-proof when the pin contacts are specified in the receptacle shell only.

This series provides many choices within the range of a medium sized, environmentally resistant cylindrical connector. With three coupling style choices - bayonet, threaded and quick-disconnect - the versatility of this family makes it increasingly popular for panel mount, box mount and line-to-line applications in aircraft. For general duty environmentally resistant requirements, this family of connectors provides a wide range of interconnection solutions.

Amphenol meets the demands for heavy duty connectors by providing three cylindrical connector series, each with unique design characteristics for reliable operation in specific industrial environments.

 High Current Capacity

Rugged Construction

Safety

Serviceability

Amphenol QWL Series Connectors are tailor made for compact, heavy duty industrial use. The outstanding performance of this series makes it well suited for shipboard installations and ground support power distribution applications where physical strength and dependability are key requirements.

The QWL Series are a versatile, economical alternative to military qualified designs.

The PPS is a miniature connector with push pull technology and is RoHS compliant. It is designed for use on equipment that is not submersed or left exposed to the elements for prolonged periods, within Industrial and Ground Harsh Environment applications.

Alden's Pulse-Lok® family of miniature auto-coupling connectors is designed for medical and instrumentation applications.

These connectors offer tactile mating and a wide variety of contact configurations in an elegant IP67 sealed plastic housing. Can be over-molded. Click here to learn more...

Pulse-Net® is a ruggedized Ethernet connector that offers the convenience and functionality of a standard RJ-45 connector plus push & click, Pulse-Lok® mating action for positive confirmation of engagement, industry standard components and termination tools, and multiple termination options..

Circuit breaking 30, 60, and 100 ampere, 600 VAC power connectors. Used for portable and detachable electrical equipment. Suitable for normal and wet locations.

HIGH RELIABILITY Unique RADSOK design and construction technology create an electrical contact interface that exceeds typical interconnect requirements. Applications in aerospace, medical, industrial, automotive, mining, offshore, and other harsh environments depend on high reliability of the Amphenol RADSOK technology. Take a more specific look at the Amphenol Vortex Series and the Amphemol GT Series, both part of the RADSOK series. .

An extensive range of coaxial interconnects is available in standard, miniature, sub-miniature, and micro-miniature types. Also available are between-series adapters, precision APC, and special purpose connectors for specific needs.  Find our more about AMPHENOL RF products

Allows Ethernet Class D/Cat 5e connection for 10BaseTX or 1000 BaseT networks in harsh environments: sealed against fluids and dusts; shock, vibration and Traction resistant; no cabling operation in field; no tools required; mechanical coding/polarization.

The RJ Field Products offers a rugged environmental system for RJ45, USB-A, USB-B, RJ11, and IEEE 1394 type connections They have many different mating types quick mating bayonet, push-pull, ratcheted threaded like D38999 for high vibration applications, and latch along with shell styles flanged and jam nut.

These connectors are suitable for military and commercial 10 BaseT, 100 BaseTX and 1000 BaseT CAT5 and CAT6 network requirements.

SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are molded in place achieving high environmental sealing to IP68. The snatch push pull design is fully grounded and cannot be locked when mated, as the cable receptacle has no moving parts, i.e. coupling nut, thus eliminating the path for the ingress of moisture and dust to the interface. Multiple shell sizes are available with an optional locking mechanism.  

Heavy-duty, multi-pin, electrical connector designed for rugged and harsh environments. One-piece, two-keyed shell, coupling nut, cable adapter, gland and clamp nut are constructed of high-grade machined aluminum with a hard coat finish for superior corrosion resistance. Formerly Pyle Star Line. PEI-Genesis Stocks Star line in component form and builds to order in 48 hours or less.

A GT Style connector with touch proof High Power (RadSok) contacts. The Vortex GT can be used in applications such as generator, fuel cell, load banks, and charging systems. The Vortex features Audible, tactile, and visual indication of full coupling. 

 

 

 

Other Features & Benefits: a) Crimp Termination b) ¼ Turn Mating  c) Crimp Termination d) Current:1000Amp e) Voltage: DC 470/600V f) Operation Temperature:-20~120F (-28C - 49C)  g) Flange Mount h)  Life cycles:>= 2000