MATES WITH SOURIAU MIL-DTL-26482The Amphenol PT series and PT-SE series connectors (MIL-DTL-26482 Series I) provide high-density contact arrangements in a circular shell. PT offers solder contacts, PT-SE offers high-performance crimp contacts, and PT-CE offers a commercial crimp option. These circular connectors provide quick-disconnect bayonet coupling for rapid mating and unmating, and several mounting styles and shell sizes. For full product details on Amphenol PT, PT-CE and PT-SE series connectors, see our specifications below.
Get shopping! Mil Spec prefixes include MS3110, MS3112, MS3114, MS3116, MS3119, MS3120, MS3122, MS3124 and MS3126. Amphenol proprietary prefix is PT.
Click to download PDF
 Tech Specs  Create P/N  Contacts & Tooling  Dimensions  Accessories  Assembly
Amphenol
|
AMPHENOL PT/PT-SE SERIES FEATURES
- Rugged Shell
Aluminum alloy shell and hardware create a rugged connector with minimal weight. These connectors have been used extensively in commercial, military, and aerospace environments. Standard shells accept all MIL-DTL-26482 accessories.
- Environmentally-sealed
Complete moisture sealing is achieved by combining four seals: shell, peripheral, interfacial, and wire. Wire seal is accomplished by multiple ripple design, exceeding the wire sealing requirements of MIL-DTL-26482.
- Resistant to Military Environments
These connectors will operate in temperatures from -67˚F to +257˚F (-55˚C to +125˚C) under the harshest possible conditions.
- Wide Range of Wire Gauges and Current-Carrying Capacity
Up to 23 amps with wire gauges from 24 to 12 AWG wire.
- Resilient insulator & grommet
A resilient neoprene insulator and integrated rear wire sealing grommet guarantees a liquid-tight assembly. Crimp contacts that can be inserted from the rear of the connector are available. Solder contacts are permanently bonded into the insulator.
- Solder or crimp gold-plated contacts
PT connector contacts are gold-plated per MIL-G-45204 type II. PT-CE commercial crimp contacts are not military-approved, but the PT-SE crimp contacts are built in accordance to MIL-C-39029. Both types of contacts are crimped with the standard M22520/1 crimp tool. Socket contacts are closed to eliminate damage from test probes and to help prevent misaligned pins during engagement. Contact insertion is from the rear of the connector. When the contact is fully inserted, it snaps securely into retention tines embedded in the insulator. Contact extraction is accomplished from the front with the proper extraction tool. Pressing the tool plunger pushes the contact out through the rear of the connector.
- Agency Approvals
MIL-DTL-26482 / UL#E115497, for solder contacts only
AMPHENOL PT/PT-SE SERIES MATERIALS & FINISHES
Shell Plating Anodic coating (alumilite), olive drab chromate over cadmium over nickel, electroless nickel, olive drab zinc, non-conductive black zinc, conductive black zinc
Contact Platings Gold-plated, 50 microinches minimum per MIL-G-45204 type II.
Insulator Resilient neoprene. PT-SE and PT-CE insulators encase a tough plastic wafer with contact retention tines for high-reliability retention of crimp contacts.
AMPHENOL PT/PT-SE SERIES ELECTRICAL DATA
Operating Voltage/Test Voltage
Maximum Operating Voltage
* Each insulator layout has a specific “service rating.” See here for solder, and here for crimp.
Current Rating
Test Current Amps (Working) Potential Drop (Millivolts) Initial
Wire Range Sizes 24 to 12 AWG (and coax)
Contact Resistance When tested to MIL-STD-1344 Method 3004, will not exceed voltage drops listed in table. Consult MIL-DTL-26482, 3.6.4 for details.
Insulation Resistance 5,000 megohms minimum at 77˚F (25˚C)
AMPHENOL PT/PT-SE SERIES MECHANICAL
Operating Temperature -67˚F to +257˚F (-55˚C to +125˚C)
Sealing 48 hours in 6 feet of water per MIL-DTL-26482 4.6.14. Meets 10- and 20-day 50-95% humidity testing per MIL-STD-1344 Method 1002.2 per MIL-DTL-26482.
Wire Sealing Range Per MIL-DTL-26482 1.4
Insulation Outside Diameter Limits: Inches (MM)
Mating Life 500 cycles minimum per MIL-DTL-26482 3.6.17
Salt Spray Unmated connectors and protective covers meet 48-hour exposure to MIL-STD-1344 Method 1001 per MIL-DTL-26482. (Cadmium plating) Olive drab/black zinc, electroless nickel meets 48-hour salt spray test.
Heat +221˚F (+105˚C) for 1,000 hours per MIL-DTL-26482
Chemical Resistance 20-hour full-immersion unmated in hydraulic fluid and lubricating oil per MIL-DTL-26482.
Vibration 10 to 2,000Hz (15g’s) 10 microseconds maximum discontinuity. To MIL-STD-1344 Method 2005 per MIL-DTL-26482.
Shock 50g’s, 11ms duration, three major axes. 10 microseconds maximum discontinuity. To MIL-STD-1344 Method 2004 per MIL-DTL-26482.
Contact Type Solder, crimp, printed circuit, thermocouple, coax
Number of Circuits PT: 1 to 61; PT-SE & PT-CE: 2 to 61
Contact Insertion (Crimp) Insertion from the rear of connector with simple hand-tool. Front release with appropriate extraction tool.
Contact Retention To MIL-STD-1344 Method 2007 per MIL-DTL-26482.
Approvals MIL-DTL-26482H
UL#E115497 (PT solder only)
All dimensions in inches (millimeters in parentheses)
AMPHENOL PT/PT-SE SERIES EXERPT FROM MIL-DTL-26482H
3.7.4 JAN and J Marking. The United States Government has adopted and is exercising legitimate control over the certification marks “JAN” and “J”, respectively, to indicate that items so marked or identified are manufactured to, and meet all the requirements of specifications. Accordingly, items acquired to, and meeting all of the criteria specified herein and in applicable specifications shall bear the certification mark “JAN” except that items too small to bear the certification mark “JAN” shall bear the letter “J”. The “JAN” or “J” shall be placed immediately before the PIN except that if such location would place a hardship on the manufacturer in connection with such marking, the “JAN” or “J” may be located on the first line above or below the PIN. Items furnished under contracts or orders which either permit or require deviation from the conditions or requirements specified herein or in applicable specifications shall not bear “JAN” or “J”. In the event an item fails to meet the requirements on this specification and the applicable specification sheets, the manufacturer shall remove completely the military PIN and the “JAN” or the “J” from the sample tested and also from all items represented by the sample. The “JAN” or “J” certification mark shall not be used on products acquired to contractor drawings or specification. The United States Government has obtained Certificate of Registration Number 504,860 for the certification mark “JAN” and Registration Number 1,586,261 for the certification mark “J”.
AMPHENOL PT/PT-SE SERIES COMPONENTS
|
|
AMPHENOL PT/PT-SE SERIES APPLICATIONS
- Power generators
- Engines
- Sensors
- Motion control
- Off-road vehicles
- Earth-moving equipment
- Ships
- Mobile equipment
- Industrial machinery
- Telecommunications
- Traffic control
|
|
AMPHENOL PT/PT-SE SERIES MILITARY PART NUMBER EXAMPLE
AMPHENOL PT/PT-SE SERIES COMMERCIAL PART NUMBER EXAMPLE
Click here to download full pdf
STEP 1: SELECT SHELL STYLE, PLUG OR RECEPTACLE
PT02E*
MS3112E°
Box Mount Receptacle PTB*
Through Bulkhead Receptacle PT06*
MS3116°
PT05A = PT06
(less rear accessories)
Cable Plug PT08E-SR*
Right Angle Cable Plug 
less rear accessories
PT00*
MS3110°
(less rear accessories)
Wall Mount Receptacle PT01*
MS3111
PT04A = PT01
(less rear accessories) Cable Mount Receptacle PT07*
MS3114°
Jam Nut Receptacle
STEP 2: SELECT ENDBELL
E††
Environmental, No Clamp A-(SR)*
Non-Environmental with Clamp
E-(SR)*
F-military° Environmental with Clamp J††
Environmental with Clamp and Cable Jacket Gland Seal
(Not available for PT07 shell style) W*
Environmental without Clamp
(Not available for PT07 Shell Style) P††
Environmental Potting
Click here for epoxy potting compound.
PART NUMBER KEY:
Commercial=( *) Commercial & Military=( ††) Military Only=( °)
STEP 3: SELECT LAYOUT
PART NUMBER KEY:
Commercial=( *) Commercial & Military=( ††)
# = Commercial Rotation Only (Not Military)
A = A-Class Only
S = Socket Insert Only
u = 14-AA Insert Follows 14-4 MIL-STD-1669A contact spacing
READ LESS
LAYOUTS BY NUMBER OF CONTACTS
CONTACT
LEGEND
Mating face view of pin inserts  = 20
 = 16
 = HV
 = 20
 = coax
 = PT-Solder
 = PT-SE Crimp
 = Solder: Military & PT
 = Crimp: Military & PT-SE
 = PT-CE
S = Socket only
Size 12 (coax)
User-Defined
READ LESS
STEP 4: SELECT CONTACT
STEP 5: SELECT ROTATION
PART NUMBER KEY:
Commercial=( *) Commercial & Military=( ††)
# = Commercial Rotation Only (Not Military)
A = A-Class Only
S = Socket Insert Only
u = 14-AA Insert Follows 14-4 MIL-STD-1669A contact spacing
STEP 6: SELECT MODIFIER
F-Style Strain Relief (not military) Anodic Coating (Alumilite) Olive Drab Chromate over Cadmium over Nickel (500-hour salt spray) Electroless Nickel (RoHS) Non-Conductive Black Zinc Alloy (RoHS) Conductive Black Zinc Alloy (RoHS) Electroless Nickel and Strain Relief (SR & 023) (RoHS) Olive Drab Zinc Alloy with Strain Relief (SR & 024) Non-conductive Black Zinc Alloy with Strain Relief (SR & 025) (RoHS) Conductive Black Zinc Alloy
Alloy with Strain Relief (SR & 027) (RoHS) Self-Closing Cap Box Mount (02) Shell sizes 8,10, 12 & 18 only
Commercial=( *)
|
|
AMPHENOL PT/PT-SE SERIES MILITARY PART NUMBER EXAMPLE
AMPHENOL PT/PT-SE SERIES COMMERCIAL PART NUMBER EXAMPLE
Click here to download full pdf
STEP 1: SELECT SHELL STYLE, PLUG OR RECEPTACLE
PT02SE*
PT02CE
MS3112E°
Box Mount Receptacle PT00*
MS3120°
PT03SE = PT00SE
(less rear accessories)
Wall Mount Receptacle PT06*
MS3126°
PT05SE = PT06SE
(less rear accessories)
Cable Plug PT08SE-SR*
Right Angle Cable Plug PT01*
MS3121°
PT04SE = PT01SE
(less rear accessories)
Cable Mount Receptacle PT07*
MS3124°
Jam Nut Receptacle
STEP 2: SELECT ENDBELL
SE*
E°
Environmental No Clamp
CE††
Proprietary SE-(SR)*
CE-(SR)††
Add SR modifier to end of part number to call out the F-style endbell
F °Environmental with Clamp SP*
CP††
P°Environmental Potting
Click here for epoxy potting compound.
Right Angle (for PT08SP)
PART NUMBER KEY:
Commercial=( *)
Commercial & Military=( ††)
Military Only=( °)
STEP 3: SELECT LAYOUT
PART NUMBER KEY:
Commercial=( *) Commercial & Military=( ††)
# = Commercial Rotation Only (Not Military)
READ LESS
LAYOUTS BY NUMBER OF CONTACTS
CONTACT
LEGEND
Mating face view of pin inserts = 20 = 16 = HV = 20 = coax = PT-Solder
= PT-SE Crimp = Solder: Military & PT
= Crimp: Military & PT-SE = PT-CE
S = Socket only
Size 12 (coax)
User-Defined
READ LESS
STEP 4: SELECT CONTACT
STEP 5: SELECT ROTATION
PART NUMBER KEY:
Commercial=( *) Commercial & Military=( ††)
# = Commercial Rotation Only (Not Military)
A = A-Class Only
S = Socket Insert Only
u = 14-AA Insert Follows 14-4 MIL-STD-1669A contact spacing
STEP 6: SELECT MODIFIER
F-Style Strain Relief (not military) Anodic Coating (Alumilite) Olive Drab Chromate over Cadmium over Nickel (500-hour salt spray) Electroless Nickel (RoHS) Non-Conductive Black Zinc Alloy (RoHS) Conductive Black Zinc Alloy (RoHS) Electroless Nickel and Strain Relief (SR & 023) (RoHS) Olive Drab Zinc Alloy with Strain Relief (SR & 024) Non-conductive Black Zinc Alloy with Strain Relief (SR & 025) (RoHS) Conductive Black Zinc Alloy
Alloy with Strain Relief (SR & 027) (RoHS) Self-Closing Cap Box Mount (02) Shell sizes 8,10, 12 & 18 only
Commercial=( *)
|
|
AMPHENOL PT/PT-SE SERIES PIN & SOCKET CRIMP CONTACTS
Pin Crimp Contacts
Pin Contact & Color Bands
20 Chromel 20 Alumel 20 Iron 20 Constantan 10-330940-01P 10-330940-02P 10-330940-03P 10-330940-04P 20 Chromel 20 Alumel 20 Iron 20 Constantan 10-252900-01P 10-252900-02P 10-252900-03P 10-252900-04P
Socket Crimp Contacts
Socket Contact & Color Bands
Socket Contact Part Number
20 Chromel 20 Alumel 20 Iron 20 Constantan 10-330940-01S 10-330940-02S 10-330940-03S 10-330940-04S 20 Chromel 20 Alumel 20 Iron 20 Constantan 10-252900-01S 10-252900-02S 10-252900-03S 10-252900-04S
All dimensions in inches (millimeters in parentheses)
AMPHENOL PT/PT-SE SERIES PIN & SOCKET CRIMP TOOLS
20 16 12 20 Chromel 20 Alumel 20 Iron 20 Constantan MS27488-20-2 MS27488-16-2 MS27488-12-2
MS27488-20-2
M81969/17-03 M81969/17-04 M81969/17-05
M81969/17-03
M81969/19-07 M81969/19-08 M81969/19-09
M81969/19-07
20 16 12 20 Chromel 20 Alumel 20 Iron 20 Constantan MS27488-20-2 MS27488-20-2 MS27488-16-2
MS27488-20-2
11-6782 11-6782 11-6781
11-6782
*Contact us for more tool accessories.
AMPHENOL PT/PT-SE SERIES PIN & SOCKET SOLDER COAX CONTACTS
Outer Shell Crimp Ferrule
MIL-C_22520/5-01 Use With Die Part # (Locator Cavity) MIL-C_22520/10-01 Use With Die Part # (Locator Cavity)
RG-161/U
RG-174A/U/U
RG-179B/U
RG-187A/U
RG-188A/U
RG-316/U
M22520/5-03 (A)
M22520/5-08 (A)
M22520/5-35 (B)
M22520/5-03 (B)
M22520/5-33 (B)
RG-58C/U
RG-141A/U
RG-303/U
M22520/5-05 (B)
M22520/5-41 (B)
RG-59B/U
RG-62A/U
RG-62B/U
RG-210/U
M22520/5-03 (B)
M22520/5-33 (B)
RG-180B/U
RG-195A/U
Raychem - 5022D1312-9
M22520/5-05 (B)
M22520/5-41 (B)
M22520/5-05 (B)
M22520/5-41 (B) RG-59B/U RG-62A/U RG-62B/U RG-210/U
Note: Solder contacts are supplied with outer contact body bonded into the insert (insulator). Contact us for wire strip lengths and
assembly instructions.
* Please check availability
+ Only mate with one another
Note: Illustrations are chart above. Note: Illustrations are for chart below.
AMPHENOL PT/PT-SE SERIES PIN & SOCKET SE CRIMP COAX CONTACTS
Hand-Crimp Tool
Outer Shell
MIL-C22520/5-01 Use With Die Part # (Locator Cavity) MIL-C22520/10-01 Use With Die Part # (Locator Cavity)
RG-161/U
RG-174A/U
RG-179B/U
RG-187A/U
RG-188A/U
RG-316/U
21-033012-001
21-033012-004
21-033038-001
21-033038-004
21-033011-001
21-033011-004
21-033037-001
21-033037-004
21-033012-003*
21-033012-005 21-033038-003*
21-033038-005 21-033011-003*
21-033011-005 21-033037-003*
21-033037-005 RG-188 or
RG-316
Double Braid 21-033012-006*
21-033012-007 21-033038-006*
21-033038-007 21-033011-006*
21-033011-007 21-033037-006*
21-033037-007 Westrex
199-49-1
Tensolite
30850/
87T-1 RG-55B/U
RG-142A/U
RG-142B/U
RG-223/U RG-58C/U
RG-141A/U
RG-303/U
21-033012-022
21-033012-026 21-033038-022*
21-033038-026* 21-033011-022
21-033011-026 21-033037-022
21-033037-026* RG-59B/U
RG-62A/U
RG-62B/U
RG-210/U RG-161/U
RG-174A/U
RG-179B/U
RG-187A/U
RG-188A/U
RG-316/U
21-033012-034
21-033012-030
21-033038-034
21-033038-030
21-033011-034
21-033011-030
21-033037-034
21-033037-030
21-033011-024
21-033011-046* 21-033037-024
21-033037-046* 21-033012-023
21-033012-027 21-033038-023*
21-033038-027 21-033011-023
21-033011-027 21-033037-023*
21-033037-027
Italicized = Matched impedance contacts. *Contact us for availability.
Availability of coax contacts varies widely. Contact us for strip lengths and assembly instructions.
AMPHENOL PT/PT-SE SERIES CONNECTOR TOOLS
TG70 Strap Wrench
The strap wrench is used to connect or disconnect coupling nuts in a confined space, or to tighten or loosen endbells without damaging the connector plating. A strap wrench also increases torque, allowing you to more easily mate or unmate a connector pair. Substitute tools, such as a pipe wrench or pliers, should never be used because of the high probability of severe damage to the connector plating or the coupling mechanism. TG69P Non-Marring Adjustable Endbell Pliers for Field Service
The TG69P pliers have resilient jaws and are used to tighten or remove endbells without damaging the connector plating. The pliers are adjustable and will accommodate all of the connector sizes in this catalog. Substitute tools, such as a pipe wrench or metal jaw pliers, should never be used due to the high probability of severe damage to the connector plating. Replacement jaws, part number G77015, are available.
600 Series Production System
The 600 series is a complete system for the proper assembly and torquing of connector endbells. The system includes a bench-mounted or hand-held torque wrench, plug and receptacle holders, and a range of endbell tightening tools. When used together, these tools provide the user with consistent endbell installations. Each item is shipped with detailed assembly instructions.
600-007
Bench-mounted torque wrench
600-004
Hand-held torque wrench
Plug & Receptacle Holders
For PT, PT-SE, MS311_, MS312_
Receptacles For PT, PT-SE, MS311_, MS312_
Plugs
AMPHENOL PT/PT-SE SERIES TORQUE VALUES
IMPORTANT NOTE: If barrel/shell has three threads or less, torque to 30 to 35 inch/Lbs (3.4 to 4.0 NM) per L-725-2.
|
|
AMPHENOL PT/PT-SE SERIES PRINTED CIRCUIT BOARD
Box Mount PT02
PT02PCB
Jam Nut PT07
PT07PCB
Part Number PT02 with PCB Contacts
Part Number PT07 with PCB Contacts
Part number prefix codes:
58 = Conductive Black Alloy (027)
71 = Olive Drab Chromate over Cadmium (typical)
72 = Anodic Coating (005)
91 = Electroless Nickel (023)
93 = Non-Conductive Black Alloy (025)
* Click here for insert arrangement (layout) codes.
All dimensions in inches (millimeters in parentheses)
AMPHENOL PT/PT-SE SERIES RECEPTACLE STYLES
PT00
PT03
MS3110
MS3120
 PT01
PT04
MS3111
MS3121
 PT02
MS3112
MS3122
 PTB
AMPHENOL PT/PT-SE SERIES JAM NUT RECEPTACLES
PT07
PT07A
 PT07E-SR
PT07SE-SR
 PT07E-
PT07SE
 PT07E-SR
PT07SE-SR
All dimensions in inches (millimeters in parentheses)
AMPHENOL PT/PT-SE SERIES ENDBELL STYLES
J
W
All dimensions in inches (millimeters in parentheses)
AMPHENOL PT/PT-SE SERIES STRAIGHT PLUGS
PT06A
PT06E
MS3116E
MS3126E
PT06E-SR
PT06SE-SR
PT06CE-SR
MS3116F
MS3126F
 PT06P
PT06SP
PT06CP
MS3116P
MS3126P
PT06W
PT06J
MS3116J
AMPHENOL PT/PT-SE SERIES RIGHT ANGLE PLUGS
PT08E
PT08SE
PT08CP
 PT08P
PT08SP
PT08CP
All dimensions in inches (millimeters in parentheses)
AMPHENOL PT/PT-SE SERIES PT00/PT02/PTB
AMPHENOL PT/PT-SE SERIES PT07
All dimensions in inches (millimeters in parentheses)
|
|
AMPHENOL PT/PT-SE SERIES MS3057-C WATERPROOF CABLE CLAMP
Flange Mount Receptacle Accessories Gasket
 Nut Plate
 Sealing Screws
 Dummy Receptacle
Plug Dust Cap
 Receptacle Flange Dust Cap
 Receptacle Jam Nut Dust Cap
 Cable Clamp
Flange Mount Receptacle Accessories
Cable Clamp for A Endbells
*A = Anodized plating (omit A for olive drab)
All dimensions in inches (millimeters in parenthesis)
|
|
AMPHENOL PT/PT-SE SERIES PT SOLDER CONTACTS
STEP 1: Slide the rear accessories over the wire bundle in the proper sequence for re-assembly: cable clamp and/ or endbell first, then ferrule and, if used, coupling nut. STEP 2: Insert individual wires through the proper holes in the grommet. Use isopropyl alcohol as a lubricant.
STEP 3: Solder wires to appropriate contacts on the rear of the connector. Information on standard soldering practices is available upon request. Please contact us. STEP 4: Fixture the connector for reassembly using the endbell assembly tools or a mating connector with contacts installed.
STEP 5: Slide the grommet down the wires (lubricating the grommet with isopropyl alcohol will help).
STEP 6: Fill all unused grommet cavities with a wire hole filler to maintain the sealing integrity of the connector.
STEP 7: Slide coupling nut, ferrule, and endbell accessories over rear of the connector and tighten. Click here for more information.
AMPHENOL PT/PT-SE SERIES PTSE & PTCE CRIMP TOOL OPERATION
STEP 1: Strip the wires to the appropriate length.
STEP 2: Open the AF8 (M22520/1-01) crimp tool by squeezing the handles. Push the latch on TH1A (M22520/1-02) to pop up the locator on the turret. Attach the turret to the AF8 crimp tool using the two captive hex bolts in the turret.
STEP 3: Select the proper locator position for your contact by rotating the locator until the proper color is aligned with the index mark. Push locator back down until it snaps into position.
STEP 4: Adjust dial for proper wire gauge. To change the dial setting, remove the lock pin and lift center of dial. Turn to the desired wire gauge. Replace lock pin on dial.
STEP 5: Cycle the tool before inserting the contact to be sure the tool is in the open position. Drop the contact, mating end first, into the crimp cavity of the tool. Squeeze the tool handle just enough to grip the contact without actually crimping it.
STEP 6: Insert the stripped wire into the contact with a slight twisting motion. Be sure all wire strands are inside the contact. Squeeze the handle to cycle the tool. The handle will not release until the contact is completely crimped.
STEP 7: Remove the crimped contact. Pull on the wire slightly to be sure it is properly crimped. Be sure the contact is not bent or damaged in any way. Visually inspect the crimp.
AMPHENOL PT/PT-SE SERIES CONTACT INSERTION
STEP 1: Slide the rear accessories over the wire bundle in the proper sequence for re-assembly: cable clamp and/or endbell first, then ferrule, and coupling nut.
STEP 2: Using the proper insertion tool from the Contact Selection Chart, slide the tool over the wire side of the contact until the tool bottoms on the contact. The tool for size 16 contacts presses against the shoulder of the contact. The rear, or insulation support, of the size 20 contacts presses against an internal shoulder in the tool tip.
STEP 3: Dip the contact and tool tip in isopropyl alcohol (do not use any lubricant other than isopropyl alcohol). Hold the tool perpendicular to the rear of the connector. Beginning with the center cavity and working outwards in a circular pattern, insert the wired contact into the rear of the connector until the contact snaps into place. A light pull on the wire will ensure that the contact is locked securely.
STEP 4: Fill any unused cavities with contacts. A wire hole filler must be inserted into the grommet behind the unused contacts to maintain the sealing integrity of the connector.
STEP 5: Check the mating face of the connector to ensure that all the same size contacts are on the same plane (fully inserted). If not, the contact is not fully inserted. Remove the contact using the proper extraction tool and procedure and re-insert. Do not attempt to reinsert the insertion tool to correct the problem. STEP 6: Fixture the connector for re-assembly using endbell assembly tools or a mating connector with contacts installed. Slide the connector accessories back down the cable over the rear of the connector and tighten. Torque as shown.
AMPHENOL PT/PT-SE SERIES CONTACT EXTRACTION
STEP 1: Remove the endbell accessories and slide them back over the wires.
STEP 3: On the mating face of the connector, insert the tool over the contact and into the insulator until the tool bottoms. While keeping an even pressure against the tool, push the plunger on the tool shaft forward with your thumb and index finger. This will release the contact from the retention tine and push it toward the rear of the connector. STEP 4: Carefully remove the extraction tool from the connector. Pull the wire by hand to completely remove the contact from the rear of the connector.
|
|
Amphenol Connectors 
