150 Watt Medical MWA150

Home

Elpac by ICCNexergy

ICCNexergey MWA150

Features:

5-Year Limited Warranty
High Efficiency: Level V
High Power Density 5.4W/in3
Lifetime Expectation >5 Years
Hold-up time >25ms at Full Load
EISA, CEC Compliant
Floating Output
Medical Approval - EN60601-1 Class I

PEI can modify standard power supplies within 5 business days.

Modified options include:

Custom Connectors
Ferrite Cores
Custom Imprinting
Special Packaging/Labeling
Overmolding
Output Cord Length

Other factory options include:

Grounded Output
White Case

Model Overview

Elpac Part Number	Output Voltage	Output Current	Peak Current¹	Total Regulation²	Typical Efficiency³
MWA150012A-12A	12.0V	12.5A	15.0A	±5%	89%
MWA150015A-12A	15.0V	10.0A	12.0A	±5%	90%
MWA150018A-12A	18.0V	8.3A	10.0A	±5%	90%
MWA150024A-12A	24.0V	6.3A	7.5A	±5%	91%
MWA150048A-11A	48.0V	3.2A	3.75A	±5%	92%

Input

Input Voltage

85 - 264VAC; 100 - 240VAC Nominal

Input Frequency

47 – 63Hz

Input Current

<2A rms

Inrush Current

<37A at 230VAC cold start

Power Factor

>0.97

Zero Load Power Consumption

<0.5W

Earth Leakage Current (Typical)

<150µA @ 132VAC @ 60Hz (typical)

<250µA @ 264VAC @ 60Hz (typical)

Patient Leakage Current

<50µA @ 132VAC @ 60Hz (typical)

<75µA @ 264VAC @ 60Hz (typical)

Output

Output Voltage

See Table

Total Regulation

+/-5%

Minimum Load

No minimum load required

Start-Up Delay

<1.5s

Hold-Up Time

>25ms at any input voltage

Ripple & Noise

<1% pk-pk ** *

Over Voltage Protection

110-135%

Over Temperature Protection

Active - Recoverable; plus Passive - Non Recoverable

Over Current Protection

120 - 180%

Short Circuit Protection

Shutdown, auto-restart (hiccup mode)

General

Efficiency

Avg Efficiency 90.8% @ 115VAC; 92.8% @ 230VAC

MTBF

min. 200,000 hours demonstrated

Size

7.56" (192mm) x 2.45" (62.2mm) x 1.52" (38.7mm)

Weight

1.55 lbs (0.70 kg)

Power Density

5.4W/in3

Environmental

Operating Temperature

0 – 60°C (Full load to 40°C, derate linearly to 50% load at 60°C)

Storage Temperature

-40°C to +85°C

Relative Humidity

5-95%, non-condensing

Cooling

Natural Convection

Vibration

All units production tested to 19.6m/s2

EMC & Safety

Emissions

FCC Class B, CISPR11 Class B EN61000-3-2, -3

Immunity

EN61000-4-2, -3, -4, -5, -6, -8, -11

Certified by TUV to the following:

cTUVus

UL 60601-1

CAN/CSA-22.2 No.601.1-M90

CB per IEC60601-1

CE marked to LVD

Notes

1 Maximum peak load (180W) lasting 500ms with a maximum 10% duty cycle.
2 Includes initial setting, line regulation, load regulation, and thermal drift.
3 Typical at 115VAC (including output cable).
* Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.

Input / Output Configuration

Input Configuration
Standard Input Cable	Not Provided
Connection on Power Supply Body	IEC 320 C14 Receptacle
Output Configuration (12V, 15V)
Standard Output Cable	4 ft.
Cord Size	4x16awg
Connector (PSU side)	Switchcraft DIN-8,P/N 15BL8M (male pins)
Mating Connector	Switchcraft 62GB8FX (8 pin) or equivalent
Output Configuration (18V, 24V)
Standard Output Cable	6 ft.
Cord Size	4x16awg
Connector (PSU side)	Switchcraft DIN-8, P/N 15BL8M (male pins)
Mating Connector	Switchcraft 62GB8FX (8 pin) or equivalent
Output Configuration (30V, 48V)
Standard Output Cable	6 ft.
Cord Size	4x18awg
Connector (PSU side)	Switchcraft DIN-5, P/N 05GM5M (male pins)
Mating Connector	Switchcraft 57GB5FX (5 pin) or equivalent
Output Pin Assignments

Pin 1	+V1
Pin 2	+V1
Pin 3	Return
Pin 4	+V1
Pin 5	Return
Pin 6	+V1
Pin 7	Return
Pin 8	Return
Output Pin Assignments

Pin 1	Return
Pin 2	Return
Pin 3	+V1
Pin 4	Return
Pin 5	+V1

Mechanical Drawing

150 Watt Medical MWA150 - Mechanical Drawing

150 Watt Medical MWA150

Model Overview

Input / Output Configuration

Mechanical Drawing

Certifications