100 Watt Medical (Class II) MWB100

Home

Elpac by ICCNexergy

ICCNexergey MWB100

Features:

High Efficiency
High Power Density 4.8W/in3
Lifetime Expectation >5 Years
Hold-up time >24ms at Full Load
EISA, CEC Compliant
Floating Output
Medical Approval - EN60601-1 Class II

PEI can modify standard power supplies within 5 business days.

Modified options include:

Custom Connectors
Ferrite Cores
Custom Imprinting
Special Packaging/Labeling
Overmolding
Output Cord Length

Other factory options include:

Grounded Output
White Case

Model Overview

Elpac Part Number	Output Voltage	Output Current	Peak Current¹	Total Regulation²	Typical Efficiency³
MWB100012A-12A	12.0V	8.3A	10.0A	±5%	88%
MWB100015A-12A	15.0V	6.7A	8.0A	±5%	89%
MWB100018A-12A	18.0V	5.6A	6.7A	±5%	89%
MWB100024A-12A	24.0V	4.2A	5.0A	±5%	89%

Input

Input Voltage

85 - 264VAC 100 - 240VAC Nominal

Input Frequency

47 – 63Hz

Input Current

<2.3A rms

Inrush Current

<37A at 230VAC cold start

Zero Load Power Consumption

<0.5W

Touch Leakage Current

<150µA @ 132VAC @ 60Hz

<120µA @ 264VAC @ 60Hz

Patient Leakage Current

<80µA @ 132VAC @ 60Hz

<120µA @ 264VAC @ 60Hz

Output

Output Voltage

See Table

Total Regulation

+/-5%

Minimum Load

No minimum load required

Start-Up Delay

<1s

Hold-Up Time

>24ms at any input voltage

Ripple & Noise

<1% pk-pk ** *

Over Voltage Protection

110-135%

Over Temperature Protection

Active - Recoverable; plus Passive - Non Recoverable

Over Current Protection

120 - 180%

Short Circuit Protection

Shutdown, auto-restart (hiccup mode)

General

Efficiency

Avg Efficiency 88.9% @ 115VAC; 90.6% @ 230VAC

MTBF

min. 200,000 hours demonstrated

Size

5.19" (132mm) x 3.07" (78mm) x 1.34" (34mm)

Weight

1.1 lbs (0.50 kg)

Power Density

4.8W/in3

Environmental

Operating Temperature

0 – 60°C (Full load to 40°C, derate linearly to 50% load at 60°C)

Storage Temperature

-40°C to +85°C

Relative Humidity

5-95%, non-condensing

Cooling

Natural Convection

Vibration

All units production tested to 19.6m/s2

EMC & Safety

Emissions

FCC Class B, CISPR11 Class B EN61000-3-2, -3

Immunity

EN61000-4-2, -3, -4, -5, -6, -8, -11

Certified by TUV to the following:

cTUVus

UL 60601-1

CAN/CSA-22.2 No.601.1-M90

CB per IEC60601-1

CE marked to LVD

Notes

1 Maximum peak load (120W) lasting 500ms with a maximum 10% duty cycle.
2 Includes initial setting, line regulation, load regulation, and thermal drift.
3 Typical at 115VAC (including output cable).
* Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.

Input / Output Configuration

Input Configuration
Standard Input Cable	Not Provided
Connection on Power Supply Body	IEC 320 C14 Receptacle
Output Configuration (15V, 18V 24V)
Standard Output Cable	6 ft.
Cord Size	2x16awg
Connector (PSU side)	Switchcraft DIN-8, P/N 15BL8MX (male pins)
Mating Connector	Switchcraft 62GB8FX or equivalent
Output Configuration (12V)
Standard Output Cable	4 ft.
Cord Size	2x16awg
Connector (PSU side)	Switchcraft DIN-8, P/N 15BL8MX (male pins)
Mating Connector	Switchcraft 62GB8FX or equivalent
Output Pin Assignments

Pin 1	+V1
Pin 2	+V1
Pin 3	Return
Pin 4	+V1
Pin 5	Return
Pin 6	+V1
Pin 7	Return
Pin 8	Return

Mechanical Drawing

100 Watt Medical (Class II) MWB100 - Mechanical Drawing

100 Watt Medical (Class II) MWB100

Model Overview

Input / Output Configuration

Mechanical Drawing

Certifications