100 Watt ITE (Class I) FWC100

Home

Elpac by ICCNexergy

Features:

High Efficiency: Level V
High Power Density 4.2W/in3
Lifetime Expectation >5 Years
Hold-up Time >48ms at Full Load
Power Factor Correction
EISA and CEC Compliant
LED Indicator
Class I

PEI can modify standard power supplies within 5 business days.

Modified options include:

Custom Connectors
Floating Output
Ferrite Cores
Custom Imprinting
Special Packaging/Labeling
Overmolding
Output Cord Lengths

Other factory options include:

White Case

Model Overview

Elpac Part Number	Output Voltage	Output Current	Peak Current¹	Total Regulation²	Typical Efficiency³
FWC100012A-12B	12.0V	8.3A	10.0A	±5%	86%
FWC100015A-12B	15.0V	6.6A	8.0A	±5%	87%
FWC100018A-11B	18.0V	5.5A	6.7A	±5%	87%
FWC100024A-11B	24.0V	4.1A	5.0A	±5%	89%
FWC100048A-11B	48.0V	2.0A	2.5A	±5%	90%

Input

Input Voltage

85 - 264VAC 100 - 240VAC Nominal

Input Frequency

47 – 63Hz

Input Current

<1.0A rms

Inrush Current

<37A at 230VAC cold start

Zero Load Power Consumption

<0.5W

Power Factor

>0.97

Touch Leakage Current

<150µA @ 132VAC @ 60Hz

<200µA @ 264VAC @ 60Hz

Output

Output Voltage

See Table

Total Regulation

+/-5%

Minimum Load

No minimum load required

Start-Up Delay

<-1s

Hold-Up Time

>48ms at any input voltage

Ripple & Noise

<1% pk-pk *

Over Voltage Protection

110-135%

Over Temperature Protection

Active - Recoverable; plus Passive - Non Recoverable

Over Current Protection

120% - 180%

Short Circuit Protection

Shutdown, auto-restart (hiccup mode)

General

Efficiency

Avg Efficiency 88.8% @ 115VAC; 89.8% @ 230VAC

MTBF

min. 200,000 hours demonstrated

Size

7.09" x 2.27" x 1.52" | 180.2mm x 57.5mm x 38.6mm

Weight

1.52 lbs (0.69 kg)

Power Density

4.2W/in3

Environmental

Operating Temperature

0 – 60°C (Full load to 40°C, derate linearly to 50% load at 60°C)

Storage Temperature

-40°C to +85°C

Relative Humidity

5-95%, non-condensing

Cooling

Natural Convection

Vibration

All units production tested to 19.6m/s2

EMC & Safety

Emissions

FCC Class B, CISPR22 Class B EN61000-3-2, -3

Immunity

EN61000-4-2, -3, -4, -5, -6, -8, -11

Certified by TUV to the following:

cTUVus

UL 60950-1

CAN/CSA-22.2 No.60950-1

CB per IEC60950-1

CE marked to LVD & EMC

Notes

1 Maximum peak load (120W) lasting 500ms with a maximum 10% duty cycle.
2 Includes initial setting, line regulation, load regulation, and thermal drift.
3 Typical at 115VAC (including output cable).
* Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.

Input / Output Configuration

Input Configuration
Standard Input Cable	6 ft cable with US standard (Nema 5-15) 3 prong connector
Connection on Power Supply Body	IEC 320 C14 Receptacle
Output Configuration (18V, 24V, 48V)
Standard Output Cable	6 ft.
Cord Size	4x18awg
Connector (PSU side)	Switchcraft DIN-5, P/N 05GM5MX for 18V, 24V & 48V
Mating Connector	Switchcraft 57GB5FX (5 pin) or equivalent
Output Configuration (12V, 15V)
Standard Output Cable	4 ft.
Cord Size	4x16awg
Connector (PSU side)	Switchcraft DIN-8,P/N 15BL8M (male pins)
Mating Connector	Switchcraft 62GB8FX (8 pin) or equivalent
Output Pin Assignments

Pin 1	+V1
Pin 2	+V1
Pin 3	Return
Pin 4	+V1
Pin 5	Return
Pin 6	+V1
Pin 7	Return
Pin 8	Return
Output Pin Assignments

Pin 1	Return
Pin 2	Return
Pin 3	+V1
Pin 4	Return
Pin 5	+V1

Mechanical Drawing

100 Watt ITE (Class I) FWC100 - Mechanical Drawing

100 Watt ITE (Class I) FWC100

Model Overview

Input / Output Configuration

Mechanical Drawing

Certifications