18 Watt ITE FWC18

Home

Elpac by ICCNexergy

18 Watt ITE FWC18

FWC18 Is Not Recommended For New Designs. Please Use FWA020 Class I or FWA020 Class II As A Replacement.

18 Watt ITE FWC18

Features:

Floating Output
High Efficiency
Fully Regulated DC Output
Lifetime Expectation >5 years
Hold-up Time >12ms at Full Load
Safety Approval - EN60601-1 Class I

PEI can modify standard power supplies within 5 business days.

Modified options include:

Custom Connectors
Ferrite Cores
Custom Imprinting
Special Packaging/Labeling
Overmolding
Output Cord Lengths

Other factory options include:

White Case

Model Overview

Elpac Part Number	Output Voltage	Output Current	Peak Current¹	Total Regulation²	Typical Efficiency³
FWC1805-760F	5.0V	3.0A	4.3A	±5%	82%
FWC1812-760F	12.0V	1.5A	1.8A	±5%	83%
FWC1815-760F	15.0V	1.2A	1.4A	±5%	84%
FWC1818-760F	18.0V	1.0A	1.2A	±5%	85%
FWC1824-760F	24.0V	0.8A	0.9A	±5%	86%

Input

Input Voltage

85 - 264VAC 100 - 240VAC Nominal

Input Frequency

47 – 63Hz

Input Current

<0.5A rms

Inrush Current

<37A at 230VAC cold start

Zero Load Power Consumption

<0.5W

Touch Leakage Current

<200µA @ 132VAC @ 60Hz

<350µA @ 264VAC @ 60Hz

Output

Output Voltage

See Table

Total Regulation

+/-5%

Minimum Load

No minimum load required

Start-Up Delay

<1s

Hold-Up Time

>12ms at any input voltage

Ripple & Noise

<1% pk-pk ** *

Over Voltage Protection

110-135%

Over Temperature Protection

Active - Recoverable; plus Passive - Non Recoverable

Over Current Protection

120 - 180%

Short Circuit Protection

Shutdown, auto-restart (hiccup mode)

General

Efficiency

Avg Efficiency 83.5% @ 115VAC; 81.6% @ 230VAC

MTBF

min. 100,000 hours demonstrated

Size

3.35" (85.0mm) x 1.97" (50.0mm) x 1.30" (33.0mm)

Weight

0.45 lbs (.20 kg)

Environmental

Operating Temperature

0 – 60°C (Full load to 40°C, derate linearly to 50% load at 60°C)

Storage Temperature

-40°C to +85°C

Relative Humidity

5-95%, non-condensing

Cooling

Natural Convection

Vibration

All units production tested to 19.6m/s2

EMC & Safety

Emissions

FCC Class B, CISPR22 Class B EN61000-3-2, -3

Immunity

EN61000-4-2, -3, -4, -5, -6, -8, -11

Certified by:

cTUVus

UL 60950-1

CAN/CSA-22.2 No.950

CB per IEC60950-1

CE marked to LVD & EMC Directive

Notes

1 Maximum peak load (21W) lasting 500ms with a maximum 10% duty cycle.
2 Includes initial setting, line regulation, load regulation, and thermal drift.
3 Typical at 115VAC (including output cable).
* Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.

Input / Output Configuration

Input Configuration
Standard Input Cable	6 ft cable with US standard (Nema 5-15) 3 prong connector
Connection on Power Supply Body	IEC 320 C14 Receptacle
Output Configuration
Standard Output Cable	6 ft.
Cord Size	2x16awg
Connector (PSU side)	Switchcraft 760 or equivalent
Mating Connector	Switchcraft 712A or equivalent
Output Pin Assignments

Center	+V1
Outside	Return

Mechanical Drawing

18 Watt ITE FWC18 - Mechanical Drawing

18 Watt ITE FWC18

Model Overview

Input / Output Configuration

Mechanical Drawing

Certifications