150 Watt ITE Open Frame FSA150

Home

Elpac by ICCNexergy

Features:

High Efficiency: Level V
Up to 180W with Forced Air
High Power Density 9.8W/in³
Lifetime Expectation >5 Years
Hold-up time >25ms at Full Load
EISA and CEC Compliant
Grounded Output
Safety Approval - EN60950-1

PEI can modify standard power supplies within 5 business days.

Model Overview

Elpac Part Number	Output Voltage	Output Current¹	Forced Air Current²	Total Regulation³	Typical Efficiency⁴
FSA150012A	12.0V	12.5A	15.0A	±5%	91%
FSA150015A	15.0V	10.0A	12.0A	±5%	91%
FSA150018A	18.0V	8.3A	10.0A	±5%	91%
FSA150024A	24.0V	6.3A	7.5A	±5%	92%

Input

Input Voltage

85 - 264VAC 100 - 240VAC Nominal

Input Frequency

47 – 63Hz

Input Current

<2A rms

Inrush Current

<37A at 230VAC cold start

Power Factor

>0.97

Zero Load Power Consumption

<0.5W

Touch Leakage Current

<150µA @ 132VAC @ 60Hz

<300µA @ 264VAC @ 60Hz

Output

Output Voltage

See Table

Total Regulation

+/-5%

Minimum Load

No minimum load required

Start-Up Delay

<1.5s

Hold-Up Time

>25ms at any Input Voltage

Ripple & Noise

<1% pk-pk ** *

Over Voltage Protection

110-135%

Over Temperature Protection

Active - Recoverable; plus Passive - Non Recoverable

Over Current Protection

120 - 180%

Short Circuit Protection

Shutdown, auto-restart (hiccup mode)

General

Efficiency

Avg Efficiency 91.7% @ 115VAC; 93.4% @ 230VAC

MTBF

min. 200,000 hours demonstrated

Size

5.00" x 3.00" x 1.22" | 127mm x 76.2mm x 30.9mm

Weight

0.75 lbs (.34 kg)

Power Density

9.8W/in³

Environmental

Operating Temperature

0 – 70°C (Full load to 50°C, derate linearly to 50% load at 70°C)

Storage Temperature

-40°C to +85°C

Relative Humidity

5-95%, non-condensing

Cooling

Natural Convection (150W) or Forced Air (180W)

Vibration

All units production tested to 19.6m/s²

EMC & Safety

Emissions

FCC class B, CISPR22 class B EN61000-3-2, -3

Immunity

EN61000-4-2, -3, -4, -5, -6, -8, -11

Certified by TUV to the following:

cTUVus

UL 60950-1

CAN/CSA-22.2 No.60950-1

CB per IEC60950-1

CE marked to LVD

Notes

1 With convection cooling. Peak load (180W) lasting 500ms with a maximum 10% duty cycle.
2 Sustained output current with minimum 100 LFM.

3 Includes initial setting, line regulation, load regulation, and thermal drift.
4 Typical at 115VAC and full load.

* Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.

Input / Output Configuration

Input Configuration
Connection on Power Supply Body	AMP p/n 640445-3 (or equivalent)
Mating Connector	AMP p/n 640250-3 (or equivalent)
Output Configuration
Connector (PSU side)	AMP p/n 640445-8 (or equivalent)
Mating Connector	AMP p/n 640250-8 (or equivalent)
Input Pin Assignments (P1)
Pin 1	AC Neutral
Pin 2	Not Assembled
Pin 3	AC Line
Output Pin Assignments
Pin 1	+V1
Pin 2	+V1
Pin 3	+V1
Pin 4	+V1
Pin 5	Return
Pin 6	Return
Pin 7	Return
Pin 8	Return

Mechanical Drawing

150 Watt ITE Open Frame FSA150 - Mechanical Drawing

150 Watt ITE Open Frame FSA150

Model Overview

Input / Output Configuration

Mechanical Drawing

Certifications