100 Watt ITE Open Frame FVA100

Home

Elpac by ICCNexergy

Features:

High Efficiency: Level V
Up to 120W with Forced Air
High Power Density 8.7W/in³
Hold-up time >60ms at Full Load
EISA and CEC Compliant
Power Factor Correction
Grounded Output
Safety Approval - EN60950-1

PEI can modify standard power supplies within 5 business days.

Model Overview

Elpac Part Number	Output Voltage	Output Current¹	Peak Current	Total Regulation²	Typical Efficiency³
FVA100012A	12.0V	8.3A	10.0A	±5%	88%
FVA100015A	15.0V	6.7A	8.0A	±5%	88%
FVA100018A	18.0V	5.6A	6.7A	±5%	89%
FVA100024A	24.0V	4.2A	5.0A	±5%	89%

Input

Input Voltage

85 - 264VAC 100 - 240VAC Nominal

Input Frequency

47 – 63Hz

Input Current

<2A rms

Inrush Current

<37A at 230VAC cold start

Power Factor

>0.96

Zero Load Power Consumption

<0.5W

Touch Leakage Current

<125µA @ 132VAC @ 60Hz

<175µA @ 264VAC @ 60Hz

Output

Output Voltage

See Table

Total Regulation

+/-5%

Minimum Load

No minimum load required

Start-Up Delay

<750ms

Hold-Up Time

>60ms at any Input Voltage

Ripple & Noise

<1% pk-pk ** *

Over Voltage Protection

110-135%

Over Temperature Protection

Active - Recoverable; plus Passive - Non Recoverable

Over Current Protection

120 - 180%

Short Circuit Protection

Shutdown, auto-restart (hiccup mode)

General

Efficiency

Avg Efficiency 88.6% @ 115VAC; 89.5% @ 230VAC

MTBF

min. 200,000 hours demonstrated

Size

4.50" (114mm) x 2.5" (63.5mm) x 1.22" (30.9mm)

Weight

0.66 lbs (0.30 kg)

Power Density

8.7W/in³ (at 120W)

Environmental

Operating Temperature

0 – 70°C (Full load to 50°C, derate linearly to 50% load at 70°C)

Storage Temperature

-40°C to +85°C

Relative Humidity

5-95%, non-condensing

Cooling

Natural Convection (100W) or Forced Air (120W)

Vibration

All units production tested to 19.6m/s²

EMC & Safety

Emissions

FCC class B, CISPR22 class B EN61000-3-2, -3

Immunity

EN61000-4-2, -3, -4, -5, -6, -8, -11

Certified by TUV to the following:

cTUVus

UL 60950-1

CAN/CSA-22.2 No.60950-1

CB per IEC60950-1

CE marked to LVD

Notes

1 With convection cooling. Peak load (120W) lasting 500ms with a maximum 10% duty cycle.
2 Includes initial setting, line regulation, load regulation, and thermal drift.
3 Typical at 115VAC and full load.* Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.

Input / Output Configuration

Input Configuration
Connection on Power Supply Body	AMP p/n 640445-3 (or equivalent)
Mating Connector	AMP p/n 640250-3 (or equivalent)
Output Configuration
Connector (PSU side)	AMP p/n 640445-8 (or equivalent)
Mating Connector	AMP p/n 640250-8 (or equivalent)
Input Pin Assignments (P1)
Pin 1	AC Neutral
Pin 2	Not Assembled
Pin 3	AC Line
Output Pin Assignments
Pin 1	+V1
Pin 2	+V1
Pin 3	+V1
Pin 4	+V1
Pin 5	Return
Pin 6	Return
Pin 7	Return
Pin 8	Return

Mechanical Drawing

100 Watt ITE Open Frame FVA100 - Mechanical Drawing

100 Watt ITE Open Frame FVA100

Model Overview

Input / Output Configuration

Mechanical Drawing

Certifications