Home Elpac by ICCNexergy 100 Watt Medical Open Frame MVA100

100 Watt Medical Open Frame MVA100

Features:

  • High Efficiency: Level V
  • Up to 120W with Forced Air
  • High Power Density 8.7W/in3
  • Hold-up Time >24ms at Full Load
  • EISA & CEC Compliant
  • Output Floating
  • Medical Approval - EN60601-1 Class I
PEI can modify standard power supplies within 5 business days.

Model Overview

Elpac Part NumberOutput VoltageOutput Current1Peak CurrentTotal Regulation2Typical Efficiency3
MVA100012A 12.0V 8.3A 10.0A ±5% 90%
MVA100015A 15.0V 6.7A 8.0A ±5% 90%
MVA100018A 18.0V 5.6A
6.7A
±5%
91%
MVA100024A 24.0V 4.2A 5.0A ±5% 92%
Input
Input Voltage 85 – 264VAC 100 – 240VAC Nominal
Input Frequency 47 – 63Hz
Input Current <2A rms
Inrush Current <37A at 230VAC cold start
Zero Load Power Consumption <0.5W
Patient Leakage Current
<50µA @ 132VAC @ 60Hz
<80µA @ 264VAC @ 60Hz
Touch Leakage Current
<125µA @ 132VAC @ 60Hz
<175µA @ 264VAC @ 60Hz
Output
Output Voltage See Table
Total Regulation +/-5%
Minimum Load No minimum load required
Start-Up Delay <750ms
Hold-Up Time >24ms at any input voltage
Ripple & Noise <1% pk-pk ** *
Over Voltage Protection 110-135%
Over Temperature Protection Active - Recoverable; plus Passive - Non Recoverable
Over Current Protection 120 - 180%
Short Circuit Protection shutdown, auto-restart (hiccup mode)
General
Efficiency Avg Efficiency 88.6% @ 115VAC; 89.5% @ 230VAC
MTBF min. 200,000 hours demonstrated
Size 4.50" x 2.5" x 1.22" | 114mm x 63.5mm x 30.9mm
Weight 0.45 lbs (.20 kg)
Power Density
8.7W/in3 (at 120W)
Environmental
Operating Temperature 0 – 70°C (Full load to 50°C, derate linearly to 50% load at 70°C)
Storage Temperature -40°C to +85°C
Relative Humidity 5-95%, non-condensing
Cooling Natural Convection (100W) or Forced Air (120W)
Vibration All units production tested to 19.6m/s2
EMC & Safety
Emissions FCC class B, CISPR11 class B EN61000-3-2, -3
Immunity EN61000-4-2, -3, -4, -5, -6, -8, -11
Certified by TUV to the following:
cTUVus
UL 60601-1
CAN/CSA-22.2 No.601.1-M90*
CB per IEC60601-1
CE marked to LVD

Notes

  • 1 With convection cooling. Peak load (120W) lasting 500ms with a maximum 10% duty cycle.
  • 2 Includes initial setting, line regulation, load regulation, and thermal drift.
  • 3 Typical at 115VAC and full load.
  • * Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.

Input / Output Configuration

Input Configuration
Connection on Power Supply Body
AMP p/n 640445-3 (or equivalent)
Mating Connector
AMP p/n 640250-3 (or equivalent)
Output Configuration
Connector (PSU Side)
AMP p/n 640445-8 (or equivalent)
Mating Connector
AMP p/n 640250-8 (or equivalent)
Input Pin Assignments (P1)
Pin 1 AC Line
Pin 2 <not assembled>
Pin 3
AC Neutral
Output Pin Assignments
Pin 1 +V1
Pin 2 +V1
Pin 3
+V1
Pin 4
+V1
Pin 5
Return
Pin 6
Return
Pin 7
Return
Pin 8 Return

 
Welcome
Please enter your Zip code/Country code to give you
up-to-the-minute pricing and availability in your area.

 I accept the terms and conditions of this website.