80 Watt ITE Open Frame FTB080

Home

Elpac by ICCNexergy

80 Watt ITE Open Frame FTA080

Features:

High Efficiency: Level V
High Power Density 12.5W/in³
Grounded Output
Lifetime Expectation >5 Years
Hold-up time >28ms at Full Load
EN60950-1 Class I

PEI can modify standard power supplies within 5 business days.

Model Overview

Elpac Part Number	Output Voltage	Output Current	Peak Current	Total Regulation	Typical Efficiency
FTB080009A	9.0V	7.2A	10.0A	±5%	88%
FTB080012A	12.0V	6.7A	8.3A	±5%	90%
FTB080015A	15.0V	5.4A	6.7A	±5%	90%
FTB080024A	24.0V	3.4A	4.2A	±5%	91%

Input

Input Voltage

85 - 264VAC 100 - 240VAC Nominal

Input Frequency

47 – 63Hz

Input Current

<2A rms

Inrush Current

<37A at 230VAC cold start

Zero Load Power Consumption

<0.3W

Touch Leakage Current

<75µA @ 132VAC @ 60Hz

<120µA @ 264VAC @ 60Hz

Output

Output Voltage

See Table

Total Regulation

+/-5%

Minimum Load

No minimum load required

Start-Up Delay

>0.2s

Hold-Up Time

>28ms at Full Load

Ripple & Noise

<1% pk-pk ** *

Over Voltage Protection

120 - 150%

Over Temperature Protection

Active - Recoverable; plus Passive - Non Recoverable

Over Current Protection

110 - 190%

Short Circuit Protection

Shutdown, auto-restart (hiccup mode)

General

Efficiency

Avg Efficiency 89.6% @ 115VAC; 87.1% @ 230VAC

MTBF

min. 200,000 hours demonstrated

Size

4.00" (101.6mm) x 2.00" (50.81mm) x 1.01" (25.7mm)

Weight

0.37 lbs (0.166 kg)

Power Density

12.5W/in³

Environmental

Operating Temperature

0 – 50°C (Full load to 50°C, derate linearly to 50% load at 70°C)

Storage Temperature

-40°C to +85°C

Relative Humidity

5-95%, non-condensing

Cooling

Natural Convection

Vibration

All units production tested to 19.6m/s²

EMC & Safety

Emissions

FCC class B, CISPR22 class B EN61000-3-2, -3

Immunity

EN61000-4-2, -3, -4, -5, -6, -8, -11

Certified by TUV to the following:

cTUVus

UL 60950-1

CAN/CSA-22.2 No.60950-1

CB per IEC60950-1

CE marked to LVD

Notes

* Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.

Input / Output Configuration

Input Configuration
Connection on Power Supply Body	AMP p/n 640445-3 (or equivalent)
Mating Connector	AMP p/n 640250-3 (or equivalent)
Output Configuration
Connector (PSU side)	AMP p/n 640445-6 (or equivalent)
Mating Connector	AMP p/n 640250-6 (or equivalent)
Input Pin Assignments (P1)
Pin 1	AC Line
Pin 2	Not Assembled
Pin 3	AC Neutral
Output Pin Assignments (P2)
Pin 1	+Vout
Pin 2	+Vout
Pin 3	Return
Pin 4	Return
Pin 5	No Connection
Pin 6	No Connection

Mechanical Drawing

80 Watt ITE Open Frame FTB080 - Mechanical Drawing

80 Watt ITE Open Frame FTB080

Model Overview

Input / Output Configuration

Mechanical Drawing

Certifications