20 Watt ITE (Class I) FWA020

Home

Elpac by ICCNexergy

Features:

High Efficiency
Full Regulated DC Output
5-Year Limited Warranty
Hold-up Time >18ms at Full Load
Safety Approval-EN60950-1 Class I
Level V, EuP Directive Compliant
LED Indicator

PEI can modify standard power supplies within 5 business days.

Modified options include:

Custom Connectors
Floating Output
Ferrite Cores
Custom Imprinting
Special Packaging/Labeling
Overmolding
Output Cord Lengths

Other factory options include:

White Case

Model Overview

Elpac Part Number	Output Voltage	Output Current	Peak Current¹	Total Regulation²	Typical Efficiency³
FWA020005A-10B	5.0V	4.0A	4.2A	±5%	80%
FWA020009A-10B	9.0V	2.22A	2.3A	±5%	83%
FWA020012A-10B	12.0V	1.67A	1.75A	±5%	84%
FWA020024A-10B	24.0V	0.84A	0.87A	±5%	86%

Input

Input Voltage

85 - 264VAC 100 - 240VAC Nominal

Input Frequency

47 – 63Hz

Input Current

<0.5A rms

Inrush Current

<50A @ 230VAC cold start

Zero Load Power Consumption

<0.3W

Touch Leakage Current

<100µA @ 132VAC @ 60Hz (typical)

<150µA @ 264VAC @ 60Hz (typical)

Output

Output Voltage

See Model Overview Table

Total Regulation

+/-5%

Minimum Load

No minimum load required

Start-Up Delay

<1.5s

Hold-Up Time

>18ms at any input voltage

Ripple & Noise

<1% pk-pk **

Over Voltage Protection

112-135%

Over Temperature Protection

Active - Recoverable; plus Passive - Non Recoverable

Over Current Protection

108% - 180%

Short Circuit Protection

Shutdown, auto-restart (hiccup mode)

General

Efficiency

Avg Efficiency 83.5% at 115VAC; 82.8% @ 230VAC

MTBF

min. 200,000 hours demonstrated

Size

3.45" (87.7mm) x 2.04" (5.18mm) x 1.30" (33.0mm)

Weight

5V 0.4lbs (0.2Kg); 24V 0.3 lbs (0.16Kg)

Power Density

3.0 W/in³

Environmental

Operating Temperature

0 – 60°C (Full load to 40°C, derate linearly to 50% load at 60°C)

Storage Temperature

-40°C to +85°C

Relative Humidity

5-95%, non-condensing

Cooling

Natural Convection

Vibration

All units production tested to 19.6m/s2

EMC & Safety

Emissions

FCC Class B, CISPR22 Class B EN61000-3-2, -3

Immunity

EN61000-4-2, -3, -4, -5, -6, -8, -11

Certified by TUV to the following:

cTUVus

UL 60950-1

CAN/CSA-22.2 No.950

CB per IEC60950-1

CE marked to LVD & EMC Directive

Notes

Input / Output Configuration

Input Configuration
Standard Input Cable	6 ft cable with US standard (Nema 5-15) 3 prong connector
Connection on Power Supply Body	IEC 320 C14 Receptacle

Output Configuration
Standard Output Cable	6 ft.
Cord Size	16AWG zip (5V, 9V) 18AWG zip (12V) 20AWG zip (24V)
Connector (PSU side)	Switchcraft 760 or equivalent
Mating Connector	Switchcraft 712A or equivalent

Output Pin Assignments

Center	+v1
Outside	Return

Mechanical Drawing

20 Watt ITE (Class I) FWA020

Model Overview

Input / Output Configuration

Mechanical Drawing

Certifications