ADVANCED SEARCH
Home Elpac by ICCNexergy 65 Watt ITE FWA065

65 Watt ITE FWA065

 

65 Watt ITE (Class I) FWA065

Features:

  • High Efficiency: Level V
  • High Power Density 4.9W/in3
  • Lifetime Expectation >5 Years
  • Hold-up Time >25ms at Full Load
  • Safety Approval - EN60950-1 Class I
  • EISA, CEC Compliant
PEI can modify standard power supplies within 5 business days.

Modified options include:

  • Custom Connectors
  • Floating Output
  • Ferrite Cores
  • Custom Imprinting
  • Special Packaging/Labeling
  • Overmolding
  • Output Cord Lengths

Other factory options include:

  • White Case

Model Overview

Elpac Part NumberOutput VoltageOutput CurrentPeak Current1Total Regulation2Typical Efficiency3
FWA065009A-11B 9.0V 8.0A 9.6A ±5% 85%
FWA065012A-11B 12.0V 6.0A 7.2A ±5% 88%
FWA065015A-11B 15.0V 4.8A 5.7A ±5% 89%
FWA065024A-11B 24.0V 3.0A
3.6A ±5%
91%
Input
Input Voltage 85 - 264VAC 100 - 240VAC Nominal
Input Frequency 47 – 63Hz
Input Current <1.5A rms
Inrush Current <37A at 230VAC cold start
Zero Load Power Consumption <0.5W
Power Factor >0.97
Touch Leakage Current
<80µA @ 132VAC @ 60Hz
<100µA @ 264VAC @ 60Hz
Output
Output Voltage See Table
Total Regulation +/-5%
Minimum Load No minimum load required
Start-Up Delay <750ms
Hold-Up Time >25ms at any input voltage
Ripple & Noise <1% pk-pk **
Over Voltage Protection 110-135%
Over Temperature Protection Active - Recoverable; plus Passive - Non Recoverable
Over Current Protection 120% - 180%
Short Circuit Protection Shutdown, auto-restart (hiccup mode)
General
Efficiency Avg Efficiency 88.2% @ 115VAC; 89.7% @ 230VAC
MTBF min. 200,000 hours demonstrated
Size 5.02" (127.6mm) x 2.20" (55.9mm) x 1.37" (34.8mm)
Weight 1.3 lbs (0.58 kg)
Power Density 4.9W/in3
Environmental
Operating Temperature 0 – 60°C (Full load to 40°C, derate linearly to 50% load at 60°C)
Storage Temperature -40°C to +85°C
Relative Humidity 5-95%, non-condensing
Cooling Natural Convection
Vibration All units production tested to 19.6m/s2
EMC & Safety
Emissions FCC Class B, CISPR22 Class B EN61000-3-2, -3
Immunity EN61000-4-2, -3, -4, -5, -6, -8, -11
Certified by TUV to the following:
cTUVus
UL 60950-1
CAN/CSA-22.2 No.60950-1
CB per IEC60950-1
CE marked to LVD & EMC

Notes:

1 Maximum peak load (86W) lasting 500ms with a maximum 10% duty cycle.
2 Includes initial setting, line regulation, load regulation, and thermal drift.
3 Typical at 115VAC (including output cable).
Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.

Input / Output Configuration

Input Configuration
Standard Input Cable 6 ft cable with US standard (Nema 5-15) 3 prong connector
Connection on Power Supply Body IEC 320 C14 Receptacle
Output Configuration
Standard Output Cable 6 ft.
Cord Size 2x16awg
Connector (PSU side) Switchcraft 760 or equivalent
Mating Connector Switchcraft 712A or equivalent
Output Configuration (9V)
Standard Output Cable 4 ft.
Cord Size 2x16awg
Connector (PSU side) Switchcraft DIN-5, P/N 05GM5MX (male pins)
Mating Connector Switchcraft 57GB5FX (5 pin) or equivalent
Output Pin Assignments

Pin 1 Return
Pin 2 Return
Pin 3 +V1
Pin 4 Return
Pin 5 +V1

Mechanical Drawing

65 Watt ITE (Class I) FWA065 - Mechanical Drawing

Certifications
 
Welcome
Please enter your Zip code/Country code to give you
up-to-the-minute pricing and availability in your area.

 I accept the terms and conditions of this website.