40 Watt ITE Open Frame FTA040

Home

Power Supplies

Elpac by ICCNexergy Power Supplies

Features:

High Efficiency: Level V
Fully Regulated DC Output
Lifetime Expectation >5 Years
Hold-up time >14ms at Full Load
EISA, CEC Compliant
Grounded Output
Safety Approval - EN60950-1

PEI can modify standard power supplies within 5 business days.

Model Overview

Elpac Part Number	Output Voltage	Output Current	Peak Current¹	Total Regulation²	Typical Efficiency³
FTA040009A	9.0V	4.4A	5.3A	±5%	85%
FTA040012A	12.0V	3.3A	4.0A	±5%	87%
FTA040015A	15.0V	2.7A	3.2A	±5%	88%
FTA040024A	24.0V	1.7A	1.6A	±5%	87%

Input

Input Voltage

85 - 264VAC 100 - 240VAC Nominal

Input Frequency

47 – 63Hz

Input Current

<1.0A rms

Inrush Current

<37A at 230VAC cold start

Zero Load Power Consumption

<0.3W

Touch Leakage Current

<60µA @ 132VAC @ 60Hz

<80µA @ 264VAC @ 60Hz

Output

Output Voltage

See Table

Total Regulation

+/-5%

Minimum Load

No minimum load required

Start-Up Delay

<250ms

Hold-Up Time

>14ms

Ripple & Noise

<1% pk-pk ** *

Over Voltage Protection

110-135%

Over Temperature Protection

Active - Recoverable; plus Passive - Non Recoverable

Over Current Protection

120 - 180%

Short Circuit Protection

Shutdown, auto-restart (hiccup mode)

General

Efficiency

Avg Efficiency 87.1% @ 115VAC; 87.1% @ 230VAC

MTBF

min. 200,000 hours demonstrated

Size

4.00" (101.6mm) x 2.00" (50.81mm) x 0.99" (25.2mm)

Weight

0.29 lbs (0.13 kg)

Power Density

5.76W/in3

Environmental

Operating Temperature

0 – 70°C (Full load to 50°C, derate linearly to 50% load at 70°C)

Storage Temperature

-40°C to +85°C

Relative Humidity

5-95%, non-condensing

Cooling

Natural Convection

Vibration

All units production tested to 19.6m/s2

EMC & Safety

Emissions

FCC class B, CISPR22 class B EN61000-3-2, -3

Immunity

EN61000-4-2, -3, -4, -5, -6, -8, -11

Certified by TUV to the following:

cTUVus

UL 60950-1

CAN/CSA-22.2 No.60950-1

CB per IEC60950-1

CE marked to LVD

Notes

1 Maximum peak load (48W) lasting 500ms with a maximum 10% duty cycle.
2 Includes initial setting, line regulation, load regulation, and thermal drift.
3 Typical at 115VAC (including output cable).
* Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor.

Input / Output Configuration

Input Configuration
Connection on Power Supply Body	AMP p/n 640445-3 (or equivalent)
Mating Connector	AMP p/n 640250-3 (or equivalent)
Output Configuration
Connector (PSU Side)	AMP p/n 640445-6 (or equivalent)
Mating Connector	AMP p/n 640250-6 (or equivalent)
Input Pin Assignments (P1)
Pin 1	AC Line
Pin 2	Not Assembled
Pin 3	AC Neutral
Output Pin Assignments
Pin 1	+V1
Pin 2	+V1
Pin 3	Return
Pin 4	Return
Pin 5	No Connection
Pin 6	No Connection

Mechanical Drawing

40 Watt ITE Open Frame FTA040 - Mechanical Drawing