Home Ulti-Mate Nanominiature Circular Connector

Ulti-Mate Nanominiature Circular Connector

Ulti-Mate Nanominiature Circular Connector





THE SMALLEST, FULLY INTERMATEABLE MIL-QUALITY CIRCULAR CONNECTOR

PEI-Genesis is now franchised to provide Ulti-Mate Nanominiature Circular connectors – the smallest military circular connectors available on the market. These are high-reliability connectors in the smallest package for mission-critical applications where size and weight limitations restrict the use of larger connectors. Typical applications include UAV’s, satellites, missile systems, and geophysical instruments. Ulti-Mate nanominiature circular connectors are built in accordance with MIL-DTL-32139, assuring intermateability and interchangeability with other connectors and meet the electrical, mechanical and interface requirements of this military specification. This series is available in 7-12-19 contact layouts.

Not sure if your application requires a nanominiature circular connector? Contact us today. Speak with one of our engineers who can discuss the advantages of an Ulti-Mate Nanominiature Circular connector and you’ll have your order within 48 hours of placing it. Guaranteed.

This e-mail address is being protected from spambots, you need JavaScript enabled to view it

Ulti-Mate Connector Inc.

MATERIALS & FINISHES

ULTI-MATE NANO CIRCULAR MATERIALS & FINISHES
Pin & Socket Contacts
Pins: BeCu alloy strip per ASTM–B–194 / Sockets: BeCu per ASTM–B–194
Contact Plating
Gold plate per ASTM B488, or SAE AMS 2422
Molded Insulators into Metal housing or Full plastic housing:
Insulating compound per MIL–I–16923. Liquid Crystal Polymer (LCP), per MIL–M–24519 GLCP–30F, 30% Glass–Filled
Hardware
Corrosion resistant steel per ASTM A 582/A582 or ASTM A 581/A581M,Passivated per SAE AMS–2700
Plating
Electroless nickel or Cadmium
Note: Stainless Steel shells are available in most configurations.

ELECTRICAL DATA

ULTI-MATE NANO CIRCULAR ELECTRICAL DATA
Contact Resistance
0.071 volt maximum drop @ 1.0 amps (.071 ohms)
Current Rating
1.0 Amp Maximum per contact
Dielectric Withstanding Voltage
250 V, RMS, 60 Hz
Insulation Resistance
5,000 Megaohms Minimum @ 100 VDC


MECHANICAL

ULTI-MATE NANO CIRCULAR MECHANICAL
Contact Engaging and Separating Forces
5 Ounce Maximum, 0.4 Ounce Minimum
Standard Wire Sizes
#30–#32 AWG
Vibration
Tested in accordance with EIA–364–28, Condition IV. No Damage or resistance change greater than 10 omhs lasting longer than 10 ns
Shock
Tested in accordance with EIA–364–27, Condition G. No Damage or resistence change greater than 10 ns
Durability
200 connector mating cycles tested in accordance with EIA–364–09. No Damage or resistance change greater than 10ohms lasting longer than 10ns
Salt Spray
No exposure of base metal or loss of performance after 96 hours for both Nickel and Cadmium plating.Mated connectors tested in accordance with EIA–364–26, Condition B. No exposure to base metal
Humidity
Mated connectors tested in accordance with EIA–364–31, Condition B (except steps 7a and 7b). Meet DWV and IR Requirements

CONTACT ARRANGEMENTS

ULTI-MATE NANO CIRCULAR CONTACT ARRANGEMENTS
1 row Nano D
51 Positions
1 row Strip
2 to 40 positions
2 row Nano D
9, 15, 21, 25, 31, 37, 51, 65
2 row Hermaphroditic
8 to 80 positions


TERMINATIONS

ULTI-MATE NANO CIRCULAR TERMINATIONS
Available Terminations
Pre-wired stranded wire 30, 32 AWG
Wide choice of stranded wire types


 
Welcome
Please enter your Zip code/Country code to give you
up-to-the-minute pricing and availability in your area.

 I accept the terms and conditions of this website.
oblivion