TECH SPECS
Electrical
Number of contacts: 4
Rated current: 3 A
Contact resistance: < 7 m Ohm
Insulation resistance:
- initial > 2 G Ohm
- after damp heat test 1 G Ohm
Dielectric strength: 1500 V dc
Rated voltage: 50 V ac
Mechanical
Insertion / withdrawal force: < 45 N
Lifetime: > 1000 cycles
Materials
Shell: Zinc diecast (ZnAl4Cu1) (Optalloy¨ or Ruthenium plating)
Insert / Insulation: Polyamid PA 6, PBT 30% GR, PBT 50% GR
Male contacts: Brass (CuZn39Pb3)
Contact surface: Gold (gal 0.2 µm Au over 2 µm Ni)
Strain relief: POM (brass)
Bushing: EPDM, ZnAl4Cu1
Environment
Operating temperature: -30¡ C to +80¡ C
Solderability: compies with IEC 68-2-20
Flammability: UL 94 HB |
TECH SPECS
Electrical
Rated current: depends on mating connector
Contact resistance: depends on mating connector
Insulation resistance - initial: > 2 G Ohm
- after damp heat test: = 1 G Ohm
Dielectric strength: 1 kV dc
Mechanical
Wiring: solder terminals
Wire size: 1 mm² / AWG 18
Cable O.D.: 4 - 7 mm
Solderability: complies with IEC 68-2-20
Materials
Shell ZnAl4Cu1, Ni or black Cr plated
Insulation: PA 6.6 30% GR
Contacts: CuZn39Pb3, 2 µm Ni (Su) or gold plated
Chuck: POM
Bushing: Polyamid PA6
Temperature range: -20°C to +65°C
|
TECH SPECS
Electrical
Number of contacts: 3
Contact resistance: ≤ 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ≤ 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ≤ 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Ni over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Bronze CuSn6
Contact surface: gal 2 µm Ag silver
Latch lock (female): St3K32
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard & Switchcraft® QG & Cannon XLR |
