Explosion-proof Amphenol Cable Assembly Services
EXPLOSION-PROOF CABLE ASSEMBLY SERVICES
PEI-Genesis is the only distributor SIRA certified to build Amphenol Explosion Proof connectors (StarlineEX and Amphe-EXTM). We are also BASEEFA competent to build explosion proof Amphenol cable assemblies for use in hazardous environments. PEI can provide a tailored solution that meets your deadline, performs to specification, and reduces your total cost.
Our field engineering team will work with you from concept through delivery. We will provide drawings, first article samples and production quantities, on-time and to specification. Forget about costly and time consuming assembly. Let PEI-Genesis delight you with a trouble-free plug and run Amphenol cable assembly.
Whether your requirement is ATEX or IECex, we can offer a solution to suit both Zone 1 and Zone 2 areas Gas, Dust and Flying's Data, Power, Signalling and Fibre optics. Our AEX or CEX certification is pending.
AMPHENOL EXPLOSION-PROOF CABLE ASSEMBLY - FEATURES
FULL TURNKEY DESIGN AND CERTIFIED INTERCONNECT SOLUTIONS
Engineered Zone 1 and 2 Hazardous Area Data, Power, Fiber Optics and Signalling design and Manufacture. This includes the standard Cable assembles and Exe/Exd Enclosures with connectors and Cable attachments
FAST RESPONSE SAMPLING AND PROTOTYPING USING LATEST TECHNOLOGIES 3D PRINTING
We have capabilities to produce 3D models/Prototypes in ABS Plus material with a print footprint of 205x205x305mm per component with any 3D CAD file
Model material P430 ABSplus in ivory, white, black, red, olive green, nectarine, fluorescent yellow, blue or gray.
Support material SR-30 Soluble Support Technology (SST)
Build Size 203 x 203 x 305 mm (8 x 8 x 12 in)
Layer thickness .178 mm (.007 in), or .254 mm (.010 in)
|
AMPHENOL EXPLOSION-PROOF CABLE ASSEMBLY - TESTING
HIGH VOLTAGE TESTING FACILITIES
Engineered Zone 1 and 2 Hazardous Area Data, Power, Fiber Optics and Signalling design and Manufacture. This includes the standard Cable assembles and Exe/Exd Enclosures with connectors and Cable attachments
TEST LEVELS:
Continuity Test - 2-wire Voltage: Standard 2.5V
Current: .1uA to 10mA
Resistance: .1∧ to 1M∧ ±2% ±.1∧
Continuity Test - 4-wire Voltage: Standard 2.5V
Current: (.001∧ - 1∧) - 2A (1∧ - 10∧) - 200mA (10∧ - 100∧) - 20mA
Resistance: .001∧ to 100∧ ±2% ±.001∧
Capacitance: 1nF to 1000μF ±10% ±50pF
Insulation Test Voltage: 100 to 1500 VDC (50 volt steps) ±5% ±5V
Resistance: 5M to 1000M ohms ±10%
Dielectric Withstand Test Voltage: 100 to 1500 VDC or 100 to 1000 VAC (50 volt steps) ±5% ±5V
Current Limit: (DC) .1mA to 2.5mA / (AC) .1mA to 1.5mA (RMS)
Dwell: (DC) 10ms to 120 sec. / (AC) 17ms to 120 sec. (1 cycle to 7200 cycles)
|
AMPHENOL EXPLOSION-PROOF CABLE ASSEMBLY - CERTIFICATIONS
- IPC620 Trained assembly operatives
All the staff involved in the EX Engineered solution are IP620 Specialists
- BASEEFA Trained Engineers
All Engineers FAE’s, IAE’s and Design involved in the EX engineered solution are trained by BASEEFA
|
