MS3057-A
Standard MS3057 cable clamps have dual-clamping action to provide a balanced, positive hold on the wires and greatly reduce moisture transmission. This cable clamp accepts MS3420 bushings. MS3420 bushings can be nested to reduce the inside diameter (ID) to more closely match the diameter of the cable or wire bundle.
Standard Clamp
Standard Clamp and Telescopic Bushing
Shell Size
Thread Class 2B
Low-Cost Cast Zinc
Aluminum w/ Brass Screws
Aluminum w/ Stainless Steel Screws
Maximum Cable Diameter
Inch (MM)
Low-Cost Zinc With Bushing
Bushing Included
Bushing ID Inch (MM)
8S/10S
1/2-28 UNEF
-
MS3057-3A
M85049/41-3A
0.250 (6.35)
-
MS3420-3
0.130 (3.3)
10SL
5/8-24 UNEF
**97-3057-1004
MS3057-4A
M85049/41-4A
0.312 (7.92)
97-3057-1004-1
MS3420-4
0.220 (5.6)
12/12S
5/8-24 UNEF
**97-3057-1004
MS3057-4A
M85049/41-4A
0.312 (7.92)
97-3057-1004-1
MS3420-4
0.220 (5.6)
12SL/14S
3/4-20 UNEF
**97-3057-1007
MS3057-6A
M85049/41-6A
0.438 (11.10)
97-3057-1007-1
MS3420-6
0.312 (7.9)
16/16S
7/8-20 UNEF
**97-3057-1008
MS3057-8A
M85049/41-8A
0.562 (14.27)
97-3057-1008-1
MS3420-8
0.437 (11.1)
18
1-20 UNEF
**97-3057-1010
MS3057-10A
M85049/41-10A
0.625 (15.88)
97-3057-1010-1
MS3420-10
0.562 (14.3)
20/22
1 3/16-18 UNEF
**97-3057-1012
MS3057-12A
M85049/41-12A
0.750 (19.0)
97-3057-1012-1
MS3420-12
0.625 (15.9)
24/28
1 7/16-18 UNEF
**97-3057-1016
MS3057-16A
M85049/41-16A
0.938 (23.80)
97-3057-1016-1
MS3420-16, -12
0.625 (15.9)
32
1 3/4-18
UNS
**97-3057-1020
MS3057-20A
M85049/41-20A
1.250 (31.75)
97-3057-1020-1
MS3420-20, -16
0.750 (19.0)
36
2-18 UNS
**97-3057-1024
MS3057-24A
M85049/41-24A
1.375 (34.92)
97-3057-1024-1
MS3420-24, -20
0.937 (23.8)
40
2 1/4-16
UNS
-
MS3057-28A
M85049/41-28A
1.625 (41.28)
-
-
-
Default is CAD OD
** Other platings are available.
All dimensions in inches (millimeters in parentheses)
MS3057-C
Standard MS3057-C waterproof cable clamp with mechanical strain relief for use with threaded endbells. Internal neoprene gland and compression ring will seal a broad range of round cable diameters, as listed below. For reduction of cable diameters, order the appropriate MS3420A bushing in table.
Wire Diameter Inches (MM)
Optional Bushings
Shell Size
Part Number
Max.
Min.
Part Number
Max. Wire DIA. (MM)
8S/10S
MS3057-3C
0.219 (5.56)
0.095 (2.41)
MS3420-3A
0.125 (3.17)
10SL/12/12S
MS3057-4C
0.312 (7.93)
0.188 (4.80)
MS3420-4A
0.219 (5.56)
12SL/14S
MS3057-6C
0.438 (11.12)
0.281 (7.10)
MS3420-6A
MS3420-4A
0.312 (7.93)
0.219 (5.56)
16/16S
MS3057-8C
0.530 (13.48)
0.312 (7.90)
MS3420-8A
MS3420-6A
0.438 (11.10)
0.312 (7.93)
18
MS3057-10C
0.625 (15.87)
0.375 (9.50)
MS3420-10A
MS3420-6A
0.438 (11.10)
0.312 (7.93)
20/22
MS3057-12C
0.750 (19.00)
0.500 (12.70)
MS3420-12A
MS3420-8A
0.540 (13.74)
0.438 (11.10)
24/28
MS3057-16C
0.940 (23.80)
0.625 (15.90)
MS3420-16A
MS3420-12A
MS3420-8A
0.750 (19.00)
0.540 (13.74)
0.438 (11.10)
32
MS3057-20C
1.25 (31.75)
0.921 (23.40)
MS3420-20A
MS3420-16A
MS3420-12A
0.938 (23.80)
0.750 (19.00)
0.540 (13.74)
36
MS3057-24C
1.38 (35.00)
1.00 (25.40)
MS3420-24A
MS3420-18A
MS3420-16A
1.12 (28.50)
0.938 (23.80)
0.750 (19.00)
40
MS3057-28C
1.62 (41.25)
1.25 (31.80)
MS3420-28A
MS3420-20A
MS3420-16A
1.125 (31.75)
0.940 (23.80)
0.750 (19.00)
All dimensions in inches (millimeters in parentheses)
MS3420
For use with style-A cable clamps and AIT/MS style-E/F endbells to resist dust, dirt, and oil. Bushings can be nested, one inside the other, to reduce the inside diameter to better seal against the cable jacket. Each bushing will accept the next smallest bushing.
Shell Size
1st Bushing
Part Number
Inside Diameter
2nd Nested Bushing
Inside Diameter
Fits in Cable Clamp
8S/10S
MS3420-3
.130 (3.30)
NONE
-
MS3057-3A
10SL
MS3420-4
.220 (5.59)
NONE
-
MS3057-4A
12/12S
MS3420-4
.220 (5.59)
NONE
-
MS3057-4A
14S
MS3420-6
.312 (7.92)
NONE
-
MS3057-6A
16S
MS3420-8
.437 (11.10)
NONE
-
MS3057-8A
16
MS3420-8
.437 (11.10)
NONE
-
MS3057-8A
18
MS3420-10
.562 (14.30)
NONE
-
MS3057-10A
20
MS3420-12
.625 (15.90)
NONE
-
MS3057-12A
22
MS3420-12
.625 (15.90)
NONE
-
MS3057-12A
24
MS3420-16
.750 (19.05)
MS3420-12
.625 (15.90)
MS3057-16A
28
MS3420-16
.750 (19.05)
MS3420-12
.625 (15.90)
MS3057-16A
32
MS3420-20
.937 (23.80)
MS3420-16
.750 (19.05)
MS3057-20A
36
MS3420-24
1.250 (31.75)
MS3420-20
.937 (23.80)
MS3057-24A
40
MS3420-28
1.375 (34.92)
MS3420-24
1.250 (31.75)
SE96-28A4
All dimensions in inches (millimeters in parentheses)
MS3420-A
For use with MS3057-C cable clamps (style-C) to reduce the wire-sealing diameter. Bushings can be nested, one inside the other, to progressively reduce the inside diameter of the cable clamp. The column labeled “reduction bushings” shows the acceptable nesting options for each clamp.
9767
9767 waterproof cable clamp with mechanical strain relief. An internal neoprene gland seal bushing and compression washer will seal a broad range of round cable diameters as listed below.
Max. Cable Outside Diameter
Min. Cable Outside Diameter
Shell Size
Cable Clamp
Part Number
Inches
MM
Inches
MM
Thread Class
2B UNEF
10SL/12S/12
9767-12-4
0.219
5.55
0.100
2.54
5/8-24
14S
9767-14-4
0.219
5.55
0.100
2.54
3/4-20
14S
9767-14-6
0.344
8.73
0.176
4.47
3/4-20
16S/16
9767-16-4
0.219
5.55
0.100
2.54
7/8-20
16S/16
9767-16-6
0.344
8.73
0.176
4.47
7/8-20
16S/16
9767-16-8
0.438
11.12
0.177
4.50
7/8-20
18
9767-18-6
0.344
8.73
0.176
4.47
1-20
18
9767-18-8
0.438
11.12
0.177
4.50
1-20
18
9767-18-10
0.563
14.29
0.292
7.42
1-20
20/22
9767-22-8
0.438
11.12
0.177
4.50
1-3/16-18
20/22
9767-22-10
0.563
14.29
0.292
7.42
1-3/16-18
20/22
9767-22-12
0.688
17.46
0.370
9.40
1-3/16-18
24/28
9767-28-10
0.563
14.29
0.292
7.42
1-7/16-18
24/28
9767-28-12
0.688
17.46
0.370
9.40
1-7/16-18
24/28
9767-28-16
0.844
21.43
0.536
13.61
1-7/16-18
32
9767-32-20
1.031
26.19
0.590
14.99
1-3/4-18UNS
36
9767-36-16
0.844
21.43
0.536
13.61
2-18UNS
GASKETS
Synthetic rubber gaskets are used to ensure a moisture-tight seal between a receptacle and the panel. Gaskets are available for front or rear panel mounting of style-0, 2, and 6B connectors. Gasket thickness is approximately .031 inches (1 mm), for nonconductive and low-temperature types. Conductive shielding gaskets contain an imbedded metal screen for EMI/RFI shielding in addition to moisture sealing. Gaskets are available for front or rear panel mounting of connectors. Gasket thickness is .020 inches (.5 mm).
Shell Size
Non-Conductive
Conductive
Low-Temperature-67ºF (-55ºC)
8S
10-040450-008
10-040450-08S
10-036675-008
10S/10SL
10-040450-010
10-040450-10S
10-036675-010
12/12S
10-040450-012
10-040450-12S
10-036675-012
14/14S
10-040450-014
10-040450-14S
10-036675-014
16S
10-040450-016
10-040450-16S
10-036675-016
16
10-040450-016
10-040450-16S
10-036675-016
18
10-040450-018
10-040450-18S
10-036675-018
20
10-040450-020
10-040450-20S
10-036675-020
22
10-040450-022
10-040450-22S
10-036675-022
24
10-040450-024
10-040450-24S
10-036675-024
28
10-040450-028
10-040450-28S
10-036675-028
32
10-040450-032
10-040450-32S
10-036675-032
36
10-040450-036
10-040450-36S
10-036675-036
40
10-040450-040
10-040450-40S
10-036675-040
METAL DUST CAPS
Metal dust caps are used to protect the contacts when the connectors are left unmated. Dust caps come with metal chain lanyards. Dummy receptacles are for front or rear panel mounting. The center of the dummy receptacle is closed. Dummy receptacles mount on the same centers and have the same outside dimensions as MS3102 receptacles. A version with a clearance hole through the middle of the connector is also available. Call for ordering information.
Dust Caps
Plug Cap
Dust Caps
Receptacle
Dummy
Receptacles
Shell
Size
8S
MS25042-8*
MS25043-8*
MS3105-8S
10S/10SL
MS25042-10*
MS25043-10*
MS3105-10S
12/12S/12SL
MS25042-12*
MS25043-12*
MS3105-12S
14S
MS25042-14*
MS25043-14*
MS3105-14S
16S
MS25042-16*
MS25043-16*
MS3105-16S
16
MS25042-16*
MS25043-16*
MS3105-16
18
MS25042-18*
MS25043-18*
MS3105-18
20
MS25042-20*
MS25043-20*
MS3105-20
22
MS25042-22*
MS25043-22*
MS3105-22
24
MS25042-24*
MS25043-24*
MS3105-24
28
MS25042-28*
MS25043-28*
MS3105-28
32
MS25042-32*
MS25043-32*
MS3105-32
36
MS25042-36*
MS25043-36*
MS3105-36
40
MS25042-40*
MS25043-40*
MS3105-40
*Contact us for all other platings
*D = Olive drab chrome over cadmium
DA = Anodized
